Slackware Packages Dependencies



Informations

  • Owner suffix : dow
  • Slackware : 10.2

Statistics

  • Installed packages :
    • 168 official packages
    • 5 outdated packages
    • 21 owned packages
    • 49 unofficial packages
    • 13 non-existent packages

Legends

_____ Official Packages
_____ Outdated official
_____ Non-existent Packages
_____ Unofficial
_____ Own

Name Description Requires Required by
a2ps-4.13b-i386-2

a2ps (any to PostScript filter)

GNU a2ps is an Any to PostScript filter. Of course it processes plain text files, but also pretty prints quite a few popular programming languages. Also contained in this package is psutils, a collection of programs for manipulating PostScript files.

a2ps is used by Apsfilter, so be sure to install this package if you plan to do any printing.

- -
aaa_base-10.2.0-noarch-2

aaa_base (Basic Linux filesystem package)

Sets up the empty directory tree for Slackware and adds an email to root's mailbox welcoming them to Linux. :) This package should be installed first, and never uninstalled.

- -
aaa_elflibs-10.2.0-i486-3

aaa_elflibs (shared libraries needed by many programs)

This is a collection of shared libraries needed to run Linux programs. ELF (Executable and Linking Format) is the standard Linux binary format. These libraries are gathered from other Slackware packages and are intended to give a fairly complete initial set of libraries. This package should be not upgraded or reinstalled (it could copy over newer library versions).

cxxlibs-5.0.7-i486-1
glib2-2.8.3-i686-1dow
libidn-0.5.17-i486-1
openssl-0.9.7g-i486-2
aalib-1.4rc5-i386-1
abiword-2.4-i686-1dow
alsa-lib-1.0.8-i486-1
alsa-oss-1.0.8-i486-1
alsa-utils-1.0.8-i486-1
amsn-0.95-i486-1dow
aMule-2.0.3-i686-1thee
apache2-2.0.52-i486-1spi
aspell-0.60.2-i486-1
bc-1.06-i386-2
bin-10.2-i486-1
bzip2-1.0.3-i486-1
cdrdao-1.1.9-i486-1
cdrtools-2.01-i486-1
cups-1.1.23-i486-1
cxxlibs-5.0.7-i486-1
db3-3.3.11-i486-4
dia-0.94-i486-1ota
dosbox-0.63-i486-1mik
elm-2.5.8-i486-1
emacs-21.4a-i486-2
enchant-1.1.6-i486-1rsa
esound-0.2.36-i486-1
espgs-8.15rc4-i486-1
expat-1.95.8-i486-1
freetype2-2.1.9-i486-2zeb
gcc-g++-3.3.6-i486-1
gconf-2.6.2-i486-1
gd-2.0.28-i486-1rob
gettext-0.14.3-i486-1
gettext-tools-0.14.3-i486-1
gftp-2.0.18-i486-1
gimp-2.2.8-i486-1
gimp-print-4.2.7-i486-1
gimp-print-4.2.7-i486-1
glibmm-2.8.1-i686-1dow
gliv-1.9.3-i486-1dow
glut-3.7-i486-1
gmime-2.1.9-i486-1rsa
gnome-keyring-0.2.1-i486-1
gnome-vfs-2.6.1.1-i486-3ccg
gnumeric-1.4.0-i486-1rsa
gphoto2-2.1.5-i486-1asz
gpm-1.19.6-i486-6
groff-1.19.1-i486-3
gtk+2-2.6.10-i486-1
gtkmm-2.6.5-i686-1dow
gucharmap-1.4.1-i486-2
hplip-0.9.2-i486-1kjz
imagemagick-6.2.3_3-i486-1
inkscape-0.42.2-i486-2arf
j2sdk-1_4_2_04-i586-3
jed-0.99_16-i486-1
lame-3.96.1-i486-1pcx
lcms-1.14-i486-1
less-382-i486-1
lesstif-0.94.4-i486-1
libbonobo-2.8.0-i486-2jim
libbonoboui-2.6.1-i486-1
libglade-2.4.2-i486-1
libgnome-2.6.1.1-i486-2
libgnomecanvas-2.6.1.1-i486-1
libgnomeprint-2.6.1-i486-1
libgnomeprintui-2.6.1-i486-1
libgnomeui-2.6.1.1-i486-1
libgphoto2-2.1.5-i486-1asz
libgsf-1.12.1-i486-1
libsigc++-2.0.16-i686-1dow
libtiff-3.7.3-i486-1
libxml++-2.12.0-i486-1dow
libxml2-2.6.22-i486-1
libxslt-1.1.15-i486-1
lynx-2.8.5rel.5-i486-1
most-4.9.5-i486-1
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mp3info-0.8.4-i486-1sam
mplayer-1.0pre7try2-i686-1dow
mplayerplug-in-2.75-i486-1tsu
ncurses-5.4-i486-2
nmap-3.93-i486-1
NVidia-1.0.7676-ix86-1dow
openssh-4.2p1-i486-1
orbit2-2.10.2-i486-1
pango-1.8.2-i486-1
perl-5.8.7-i486-1
php-apache2-5.0.3-i486-1spi
pkgtools-10.2.0-i486-5
procps-3.2.5-i486-1
proftpd-1.2.10-i486-4
python-2.4.1-i486-1
rar-3.4-i386-1ac0
rpm-4.2.1-i486-3
rsync-2.6.6-i486-1
samba-3.0.20b-i486-1
sane-1.0.16-i486-1
screen-4.0.2-i486-1
scummvm-0.8.0_slack-i486-1
sdl-1.2.9-i486-1
SDL_mixer-1.2.5-i686-3jto
SDL_ttf-2.0.7-i686-1jlp
seejpeg-1.10-i386-1
sodipodi-0.34-i486-2gen
spcaview-20051001-i486-0.ogm
svgalib-1.4.3-i386-2
synfig_core-0.61.01-i486-1dow
synfig_studio-0.61.01-i486-1dow
taglib-1.4-i486-1
tcpip-0.17-i486-35
tetex-3.0-i486-1
unrar-3.4.3-i486-1arf
usbutils-0.11-i486-3
util-linux-2.12p-i486-2
windowmaker-0.92.0-i486-1
Wine-20041019-i486-S10nodebug
wv-1.0.3-i486-1kjz
wxGTK2-2.6.1-i686-1thee
x11-6.8.2-i486-4
xawtv-3.95-i686-1dow
xchat-2.4.5-i486-1
xlockmore-5.18-i486-1
xmms-1.2.10-i486-3
xsane-0.97-i486-1
xv-3.10a-i486-4
zsnes-1.36-i486-1cy
aalib-1.4rc5-i386-1

 aalib (ASCII Art library)               _1l1vlvlvlvlvlvlvlvlvvl=.
                                      __111llvl+' __...._   +1lv11=.
 AA-lib is an ASCII art graphics     _11vllvlv+  =vlvlvl1=  /1vlvv1i=_
 library.  Internally, the AA-lib   _vvllvlvlv=  -+vlvlvlvlvlvlvlvdvl=_
 API is similar to other graphics  _:lvlvlvlvlv=.     --^-^1lvlvlrlvv1s
 libraries, but it renders the     =llvlvvlvlvv11lvl=....   -lvlevlvlvv
 the output into ASCII art (like   =lvlvlvlvll-^+1vv11111v_  vlkllvllvl
 the example to the right :^)      =lvlvlvlvl1   +1vv1v1lv  _llvlvlvlvl
 The developers of AA-lib are       +1lv |vlvl'    -^-^-   _1olvlvlvlv'
 Jan Hubicka, Thomas A. K. Kjaer,   -1vl |lvlvlvlvlvlvlvlvv1vlvlvlvlv+.
 Tim Newsome, and Kamil Toman.        +1 ^^^^^^^^^^^^^^^^^^^^^^^^vlv-
                                       -+uvlvlvlvlvlvlvlvlvlvlvlvl+_
                                          -vlvlvlvlvlvlvlvllvlvl-'
aaa_elflibs-10.2.0-i486-3
x11-6.8.2-i486-4
gimp-2.2.8-i486-1
mplayer-1.0pre7try2-i686-1dow
xawtv-3.95-i686-1dow
abiword-2.4-i686-1dow

abiword (A word processor similar to MSWord)

AbiWord is a multi-platform wordprocessor having an environment similar to MSWord. It can read/write MSWord format also.

Packaged by Mounir AITTAHAR on an not-up-to-date Slackware 10.2 system.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
cxxlibs-5.0.7-i486-1
enchant-1.1.6-i486-1rsa
fribidi-0.10.5-i486-1rsa
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
gucharmap-1.4.1-i486-2
libart_lgpl-2.3.17-i486-1
libglade-2.4.2-i486-1
libgnomecanvas-2.6.1.1-i486-1
libgnomeprint-2.6.1-i486-1
libgnomeprintui-2.6.1-i486-1
libiconv-1.9.1-i486-1rsa
libxml2-2.6.22-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
-
alsa-driver-1.0.8_2.4.29-i486-1
1.0.9b_2.4.31 available

alsa-driver (Advanced Linux Sound Architecture drivers)

The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI functionality to the Linux operating system. This package contains drivers in the form of kernel modules and include files for all of the sound cards supported by ALSA.

For more information, see http://alsa-project.org

- -
alsa-lib-1.0.8-i486-1
1.0.9 available

alsa-lib (Advanced Linux Sound Architecture library)

The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI functionality to the Linux operating system. This is the ALSA library (libasound) which is used by audio applications.

For more information, see http://alsa-project.org

aaa_elflibs-10.2.0-i486-3
-
alsa-oss-1.0.8-i486-1
1.0.9 available

alsa-oss (library/wrapper to use OSS programs with ALSA)

The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI functionality to the Linux operating system. OSS (Open Sound System) is an older sound system for Linux that ALSA is replacing. Using the aoss wrapper you can use programs that only support OSS with ALSA without having to load the OSS compatibility kernel modules.

aaa_elflibs-10.2.0-i486-3
-
alsa-utils-1.0.8-i486-1
1.0.9a available

alsa-utils (Advanced Linux Sound Architecture utilities)

The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI functionality to the Linux operating system. This package contains command line audio utilities for use with ALSA: alsactl (manage soundcard settings) arecord/aplay (capture and play audio) amixer (adjust mixer settings from the command line) alsamixer (an ncurses-based console mixer)

For more information, see http://alsa-project.org

aaa_elflibs-10.2.0-i486-3
-
amsn-0.95-i486-1dow

aMSN 0.95 Multilanguage MSN Messenger clone based on CCMSN

This is a modified and multilanguage version of Compu's Messenger (CCMSN). It feature sound for events, look and feel similar to original MSN Messenger, multilanguage, file transfers, group support and new MSNP9.

It's a clone of the original MSN Messenger, having the same look and feel. Some additional features exist such as on event alarms, history and we are working on more features.

Author: Didimo Grimaldo, Alvaro J. Iradier, Khalaf Philippe, Dave Mifsud

Package created by Downwater <downwater@free.fr>

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
x11-6.8.2-i486-4
-
aMule-2.0.3-i686-1thee

aMule (the all-platform eMule)

The "all-platform eMule", it is a eMule-like client for ed2k network, supporting Linux, *BSD platforms, Solaris, *MacOSX and *Win32 (*soon). It was forked from xMule project back in september 2003 (not related to it anymore, except little bits of old code), to drive it to a brand new direction and quality. Uses wxWidgets (formely known as wxWindows) for multiplatform support.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
binutils-2.15.92.0.2-i486-3
cxxlibs-5.0.7-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
pango-1.8.2-i486-1
wxGTK2-2.6.1-i686-1thee
x11-6.8.2-i486-4
-
apache2-2.0.52-i486-1spi

apache (The Apache HTTP Server)

Apache is the most popular web server in the known universe; over half of the servers on the Internet are running Apache or one of its variants.

If you need SSL support, you need to create a server certificate. A helper script - pkgmkcert.sh - is included to facilitate this task, look for it in /etc/apache2/. Also, you must start apache with 'apachectl startssl' instead of 'apachectl start'. Package Created By: Bren <spike@spykes.net>

aaa_elflibs-10.2.0-i486-3
openssl-0.9.7g-i486-2
-
aspell-0.60.2-i486-1

aspell (spell checker)

GNU Aspell is a spell checker designed to eventually replace Ispell. It can either be used as a library or as an independent spell checker.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
enchant-1.1.6-i486-1rsa
php-apache2-5.0.3-i486-1spi
atk-1.9.1-i486-1

atk

atk is a library of accessability functions that is used by the GTK+-2 toolkit.

glib2-2.8.3-i686-1dow
abiword-2.4-i686-1dow
aMule-2.0.3-i686-1thee
dia-0.94-i486-1ota
gconf-2.6.2-i486-1
gftp-2.0.18-i486-1
gimp-2.2.8-i486-1
gliv-1.9.3-i486-1dow
gnome-keyring-0.2.1-i486-1
gnumeric-1.4.0-i486-1rsa
gtk+2-2.6.10-i486-1
gtkmm-2.6.5-i686-1dow
gucharmap-1.4.1-i486-2
inkscape-0.42.2-i486-2arf
libbonoboui-2.6.1-i486-1
libglade-2.4.2-i486-1
libgnomecanvas-2.6.1.1-i486-1
libgnomeprintui-2.6.1-i486-1
libgnomeui-2.6.1.1-i486-1
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mplayerplug-in-2.75-i486-1tsu
NVidia-1.0.7676-ix86-1dow
sane-1.0.16-i486-1
sodipodi-0.34-i486-2gen
synfig_studio-0.61.01-i486-1dow
wxGTK2-2.6.1-i686-1thee
xchat-2.4.5-i486-1
xsane-0.97-i486-1
audiofile-0.2.6-i486-1

audiofile (audio support library)

Audiofile is a library to handle various audio file formats, and is used by the esound daemon. You can also use it to develop your own audiofile applications.

- esound-0.2.36-i486-1
gnumeric-1.4.0-i486-1rsa
libbonoboui-2.6.1-i486-1
libgnome-2.6.1.1-i486-2
libgnomeui-2.6.1.1-i486-1
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mplayer-1.0pre7try2-i686-1dow
xmms-1.2.10-i486-3
autoconf-2.59-noarch-1

autoconf (generate configuration scripts)

GNU autoconf is an extensible package of m4 macros that produce shell scripts to automatically configure software source code packages. These scripts can adapt the packages to many kinds of UNIX-like systems without manual user intervention. Autoconf creates a configuration script for a package from a template file that lists the operating system features that the package can use, in the form of m4 macro calls. You must install the "m4" package to be able to use autoconf.

- -
automake-1.9.5-noarch-1

automake (a Makefile generator)

This is Automake, a Makefile generator. It was inspired by the 4.4BSD make and include files, but aims to be portable and to conform to the GNU standards for Makefile variables and targets. Automake is a Perl script. The input files are called Makefile.am. The output files are called Makefile.in; they are intended for use with Autoconf. Automake requires certain things to be done in your configure.in. You must install the "m4" and "perl" packages to be able to use automake.

- -
bash-3.0-i486-4

bash (sh-compatible shell)

The GNU Bourne-Again SHell. Bash is a sh-compatible command interpreter that executes commands read from the standard input or from a file. Bash also incorporates useful features from the Korn and C shells (ksh and csh). Bash is ultimately intended to be a conformant implementation of the IEEE Posix Shell and Tools specification (IEEE Working Group 1003.2).

Bash must be present for the system to boot properly.

- -
bc-1.06-i386-2

bc (An arbitrary precision calculator language)

bc is an arbitrary precision numeric processing language. Syntax is similar to C, but differs in many substantial areas. It supports interactive execution of statements. bc is a utility included in the POSIX P1003.2/D11 draft standard.

The GNU version of bc was written by Philip A. Nelson.

aaa_elflibs-10.2.0-i486-3
-
bin-10.2-i486-1

bin (some common system utilities)

The "bin" package is a collection of utilities for handling various kinds of archives, identifying file types, and processing data. Several of these tools are used by system scripts, so this is a required package. The bin package contains these programs:

bban compress diskcopy dosfsck ed eject fbset file fiz fromdos lha mkdosfs mktemp patch rescan-scsi-bus rpm2targz rpmoffset run-parts savelog shar splitvt sysvbanner tempfile time todos tree unarj unshar uudecode uuencode volname which xx zoo

aaa_elflibs-10.2.0-i486-3
-
bin86-0.16.15-i486-1

bin86 (8086 assembler/loader)

This is a complete 8086 assembler and loader which can make 32-bit code for the 386+ processors. In the past it was used to compile the 16-bit bootsector and setup binaries for the kernel, but modern (2.4.x or newer) kernels use GNU ld instead.

The bin86 package is needed to compile 2.2.x or earlier kernels.

- -
bind-9.3.1-i486-1

bind (DNS server and utilities)

The named daemon and support utilities such as dig, host, and nslookup. Sample configuration files for running a simple caching nameserver are included. Documentation for advanced name server setup can be found in /usr/doc/bind-9.x.x/.

openssl-0.9.7g-i486-2
-
binutils-2.15.92.0.2-i486-3

binutils (GNU binary development tools)

Binutils is a collection of binary utilities. It includes "as" (the portable GNU assembler), "ld" (the GNU linker), and other utilities for creating and working with binary programs.

These utilities are REQUIRED to compile C, C++, Objective-C, Fortran, and most other programming languages.

- aMule-2.0.3-i686-1thee
bzip2-1.0.3-i486-1
Release 2 available

bzip2 (a block-sorting file compressor)

Bzip2 compresses files using the Burrows-Wheeler block sorting text compression algorithm, and Huffman coding. Compression is generally considerably better than that achieved by more conventional LZ77/LZ78- based compressors, and approaches the performance of the PPM family of statistical compressors.

Julian Seward <jseward@acm.org> is the author of bzip2.

aaa_elflibs-10.2.0-i486-3
-
cdparanoia-IIIalpha9.8-i386-1

cdparanoia (digital audio extraction tool)

Cdparanoia is a Compact Disc Digital Audio (CDDA) extraction tool, commonly known on the net as a 'ripper'. It reads digital audio data from a Compact Disc and saves it to sound files. Cdparanoia has been designed to read correct audio data even using cheap CDROM drives prone to misalignment, frame jitter and loss of streaming. Cdparanoia will also read and repair data from CDs that have been damaged in some way.

- gnome-vfs-2.6.1.1-i486-3ccg
mplayer-1.0pre7try2-i686-1dow
cdrtools-2.01-i486-1

cdrtools

Tools for mastering and writing compact discs.

cdda2wav -- CD audio sampling utility. cdrecord -- burn discs in most ATAPI and SCSI CD-R drives. mkisofs -- create ISO9660/HFS/Joliet CD-ROM images. mkzftree -- compress a file tree to make a compressed CD-ROM.

aaa_elflibs-10.2.0-i486-3
-
coreutils-5.2.1-i486-1

coreutils (core GNU utilities)

These are the GNU core utilities, the basic command line programs such as 'mkdir', 'ls', and 'rm' that are needed for the system to run. This package is the union of the GNU fileutils, sh-utils, and textutils packages. Most of these programs have significant advantages over their Unix counterparts, such as greater speed, additional options, and fewer arbitrary limits.

- -
cpio-2.5-i386-1

cpio (backup and archiving utility)

This is GNU cpio, a program to manage archives of files. This package also includes mt, a tape drive control program. cpio copies files into or out of a cpio or tar archive, which is a file that contains other files plus information about them, such as their pathname, owner, timestamps, and access permissions. The archive can be another file on the disk, a magnetic tape, or a pipe.

- -
cups-1.1.23-i486-1

CUPS (Common UNIX Printing System)

The Common UNIX Printing System provides a portable printing layer for UNIX(R)-like operating systems. It has been developed by Easy Software Products to promote a standard printing solution for all UNIX vendors and users. CUPS uses the Internet Printing Protocol ("IPP") as the basis for managing print jobs and queues. The CUPS package includes System V and Berkeley command-line interfaces, a PostScript RIP package for supporting non-PostScript printer drivers, and tools for creating additional printer drivers and other CUPS services.

aaa_elflibs-10.2.0-i486-3
openssl-0.9.7g-i486-2
-
cxxlibs-5.0.7-i486-1

cxxlibs (C++ shared library compatibility package)

This package contains the shared libraries needed to run dynamically linked C++ binaries linked with older versions of libstdc++.

aaa_elflibs-10.2.0-i486-3
aaa_elflibs-10.2.0-i486-3
abiword-2.4-i686-1dow
amsn-0.95-i486-1dow
aMule-2.0.3-i686-1thee
aspell-0.60.2-i486-1
cdrdao-1.1.9-i486-1
dia-0.94-i486-1ota
dosbox-0.63-i486-1mik
enchant-1.1.6-i486-1rsa
espgs-8.15rc4-i486-1
gettext-0.14.3-i486-1
glibmm-2.8.1-i686-1dow
gliv-1.9.3-i486-1dow
glut-3.7-i486-1
groff-1.19.1-i486-3
gtkmm-2.6.5-i686-1dow
hplip-0.9.2-i486-1kjz
imagemagick-6.2.3_3-i486-1
inkscape-0.42.2-i486-2arf
lcms-1.14-i486-1
libsigc++-2.0.16-i686-1dow
libtiff-3.7.3-i486-1
libxml++-2.12.0-i486-1dow
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mplayer-1.0pre7try2-i686-1dow
mplayerplug-in-2.75-i486-1tsu
nmap-3.93-i486-1
php-apache2-5.0.3-i486-1spi
python-2.4.1-i486-1
rar-3.4-i386-1ac0
scummvm-0.8.0_slack-i486-1
sdl-1.2.9-i486-1
SDL_mixer-1.2.5-i686-3jto
SDL_ttf-2.0.7-i686-1jlp
spcaview-20051001-i486-0.ogm
synfig_core-0.61.01-i486-1dow
synfig_studio-0.61.01-i486-1dow
taglib-1.4-i486-1
tetex-3.0-i486-1
unrar-3.4.3-i486-1arf
Wine-20041019-i486-S10nodebug
wxGTK2-2.6.1-i686-1thee
x11-6.8.2-i486-4
xlockmore-5.18-i486-1
zsnes-1.36-i486-1cy
db3-3.3.11-i486-4

db3 (Berkeley database library version 3)

The Berkeley Database (Berkeley DB) library provides embedded database support for both traditional and client/server applications.

This package should be installed if compatibility is needed with databases created with the Berkeley DB version 3.

aaa_elflibs-10.2.0-i486-3
-
devs-2.3.1-noarch-22

devs (system device files)

This package creates special files in the /dev directory that represent your system's hardware, and a tool (/dev/MAKEDEV) for creating new device files. These files are required to access hardware on a Linux system.

- -
dia-0.94-i486-1ota

dia

Dia is designed to be much like the commercial Windows program 'Visio'. It can be used to draw many different kinds of diagrams.

packager: otaku@fastwebnet.it

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
cxxlibs-5.0.7-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
libart_lgpl-2.3.17-i486-1
libxml2-2.6.22-i486-1
libxslt-1.1.15-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
-
diffutils-2.8.1-i386-1

diffutils (finds differences between files)

The GNU diff utilities finds differences between files. A major use for this package is to make source code patches.

- -
dosbox-0.63-i486-1mik

dosbox 0.63

an x86/DOS emulator with sound/graphics that uses the SDL-library. DOSBox emulates CPU:286/386 realmode/protected mode, Directory FileSystem/XMS/EMS, Tandy/Hercules/CGA/EGA/VGA/VESA graphics, SoundBlaster/Gravis Ultra Sound card.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
NVidia-1.0.7676-ix86-1dow
sdl-1.2.9-i486-1
x11-6.8.2-i486-4
-
e2fsprogs-1.38-i486-2

e2fsprogs

Utilities needed to create and maintain ext2 and ext3 filesystems.

These utilities were written by Remy Card (the developer and maintainer of the ext2 fs) and Theodore T'so.

- util-linux-2.12p-i486-2
elm-2.5.8-i486-1

elm (Menu-driven user mail program)

Elm is an interactive screen-oriented mailer program originally written by Dave Taylor, and continued by the Elm Development Group.

aaa_elflibs-10.2.0-i486-3
-
emacs-21.4a-i486-2

emacs (GNU Emacs)

Base binaries and support files for the GNU Emacs editor/environment. This version supports X. If you do not have X installed, you will also have to install the replacement Emacs binary that does not require the X11, Xaw3d, and Xt libraries.

The emacs binary in this package was configured with these options: i486-slackware-linux --prefix=/usr --with-x11 --with-x-toolkit --with-pop

aaa_elflibs-10.2.0-i486-3
libungif-4.1.3-i486-1
x11-6.8.2-i486-4
xaw3d-1.5-i386-3
-
emacs-leim-21.4-noarch-1

emacs-leim (Library of Emacs Input Method)

The leim package for Emacs provides input methods for many languages including Chinese, Tibetan, Vietnamese, Thai, Korean, and more. It also provides improved handling of many non-US keyboard layouts.

- -
enchant-1.1.6-i486-1rsa

enchant (A spell checking library)

Enchant appears to be a generic spell checking library. You can request dictionaries from it, ask if a word is correctly spelled, get corrections for a misspelled word, etc...Beneath the surface, Enchant is a whole lot more - and less - than that. You'll see that Enchant isn't really a spell checking library at all.

Packaged by R S Ananda Murthy on an up-to-date Slackware 10.1 system.

aaa_elflibs-10.2.0-i486-3
aspell-0.60.2-i486-1
cxxlibs-5.0.7-i486-1
glib2-2.8.3-i686-1dow
abiword-2.4-i686-1dow
esound-0.2.36-i486-1

esound (Enlightened Sound Daemon)

EsounD, the Enlightened Sound Daemon, is a server process that mixes several audio streams for playback by a single audio device. For example, if you're listening to music on a CD and you receive a sound-related event from ICQ, the two applications won't have to jockey for the use of your sound card. Install esound if you'd like to let sound applications share your audio device.

aaa_elflibs-10.2.0-i486-3
audiofile-0.2.6-i486-1
gnumeric-1.4.0-i486-1rsa
libbonoboui-2.6.1-i486-1
libgnome-2.6.1.1-i486-2
libgnomeui-2.6.1.1-i486-1
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mplayer-1.0pre7try2-i686-1dow
xmms-1.2.10-i486-3
espgs-8.15rc4-i486-1

espgs (ESP Ghostscript)

ESP Ghostscript is a customized version of GNU Ghostscript, an interpreter of Adobe Systems' PostScript(tm) and Portable Document Format (PDF) languages. Ghostscript is an essential part of the printing subsystem, taking PostScript output from applications and converting it into an appropriate printer or display format. Ghostscript supports many printers directly, and more are supported through gimp-print and HPIJS, which are add-on packages that work with Ghostscript's IJS driver.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
openssl-0.9.7g-i486-2
x11-6.8.2-i486-4
-
etc-5.1-noarch-10

etc (system configuration files)

System configuration files. The /etc directory is traditionally the location where configuration files are found.

- -
ETL-0.04.07-i486-1dow

Extended Template Library.

"This is a bunch of template classes that Synfig relies on. I plan on later integrating it directly into Synfig Core." - Robert Quattlebaum

Packaged by Mounir AITTAHAR

- -
expat-1.95.8-i486-1

expat

This is Expat, a C library for parsing XML, written by James Clark. Expat is a stream-oriented XML parser used by Python, GNOME, Xft2, and other things.

aaa_elflibs-10.2.0-i486-3
-
findutils-4.1.7-i386-1

findutils (utilities to locate files)

This package contains the GNU find and xargs programs. The find and xargs implementations comply with POSIX 1003.2. They also support some additional options, some borrowed from Unix and some unique to GNU.

- -
floppy-5.4-i386-3

floppy (floppy disk utilities)

Contains fdutils-5.4, tools to test and format floppy disks; and mtools-3.9.8, a collection of utilities for using DOS/Windows floppy disks with Linux.

x11-6.8.2-i486-4
-
freetype2-2.1.9-i486-2zeb

freetype2 2.1.9 (software font engine)

FreeType 2 is a software font engine that is designed to be small, efficient, highly customizable and portable while capable of producing high-quality output (glyph images). It can be used in graphics libraries, display servers, font conversion tools, text image generation tools, and many other products as well.

View my other packages at http://guruworld.org/slack

aaa_elflibs-10.2.0-i486-3
-
fribidi-0.10.5-i486-1rsa

fribidi (A free implementation of Unicode BiDirectional Algorithm)

The GNU FriBidi API is not finished yet, and the design is by no means set in stone. Right now we are working on a new design for GNU FriBidi, which has led to a new code base, not released yet. The main goal of this new effort at the moment is to add support for Arabic Joining/Shaping. One of the main goals as a GNU project is to be widely used. If you decide not to use it, mail us and let us know your rationale - design, licensing, indentation style, we prefer to know.

Packaged by R S Ananda Murthy on an up-to-date Slackware 10.1 system.

- abiword-2.4-i686-1dow
gawk-3.1.5-i486-1

gawk (pattern scanning and processing language)

Gawk is the GNU Project's implementation of the AWK programming language. It conforms to the definition of the language in the POSIX 1003.2 Command Language And Utilities Standard. This version in turn is based on the description in The AWK Programming Language, by Aho, Kernighan, and Weinberger, with the additional features found in the System V Release 4 version of UNIX awk. Gawk also provides more recent Bell Labs awk extensions, and some GNU-specific extensions.

- -
gc-6.6-i686-1dow

The Boehm-Demers-Weiser conservative garbage collector can be used as a garbage collecting replacement for C malloc or C++ new. It is also used by a number of programming language implementations that use C as intermediate code. Alternatively, it may be used as a leak detector for C or C++ programs.

Packaged by Mounir AITTAHAR <downwater@free.fr>

- inkscape-0.42.2-i486-2arf
gcc-3.3.6-i486-1

gcc (Base GCC package with C support)

GCC is the GNU Compiler Collection.

This package contains those parts of the compiler collection needed to compile C code. Other packages add C++, Fortran, Objective-C, and Java support to the compiler core.

- -
gcc-g++-3.3.6-i486-1

gcc-g++ (C++ for GCC)

C++ support for the GNU Compiler Collection.

This package contains those parts of the compiler collection needed to compile C++ code. The base gcc package is also required.

aaa_elflibs-10.2.0-i486-3
-
gconf-2.6.2-i486-1
Doesn't exist in Slackware 10.2

gconf

GConf is the GNOME Configuration database system.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
libxml2-2.6.22-i486-1
orbit2-2.10.2-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
gnome-vfs-2.6.1.1-i486-3ccg
gnumeric-1.4.0-i486-1rsa
libbonoboui-2.6.1-i486-1
libgnome-2.6.1.1-i486-2
libgnomeui-2.6.1.1-i486-1
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
gd-2.0.28-i486-1rob

gd (image manipulating library)

gd was created to allow graphs, charts and the like to be generated on the fly for use on the World wide Web, but is useful for any application in which custom images are useful.

gd library creates PNG, JPEG and WBMP images.

Packaged by: Robert Stan

aaa_elflibs-10.2.0-i486-3
-
gettext-0.14.3-i486-1

gettext

The GNU gettext package contains "gettext" and "ngettext", programs that are used to internationalize the messages given by shell scripts.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
-
gettext-tools-0.14.3-i486-1

gettext-tools

The GNU gettext-tools package is useful for authors and maintainers of internationalized software, or for anyone compiling programs that use the gettext functions. This package provides the needed tools and library functions for the handling of messages in different languages. Some other GNU packages use the gettext program (included in this package) to internationalize the messages given by shell scripts.

Unresolved librairies :
  • libgcj.so.4
aaa_elflibs-10.2.0-i486-3
-
gftp-2.0.18-i486-1

gftp

gFTP is a multithreaded FTP client for X written using GTK+. It features simultaneous downloads, resuming of interrupted file transfers, file transfer queues, downloading of entire directories, ftp proxy support, remote directory caching, passive and non-passive file transfers, drag-n-drop support, bookmarks menu, stop button, and many more features.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
openssl-0.9.7g-i486-2
pango-1.8.2-i486-1
x11-6.8.2-i486-4
-
gimp-2.2.8-i486-1

gimp (The GNU Image Manipulation Program)

The GIMP is a powerful tool for the preparation and manipulation of digital images. The GIMP provides the user with a wide variety of image manipulation, painting, processing, and rendering tools. The GIMP's open design and extensible architecture make for a very powerful end product for photo and image retouching, web graphics design, or digital illustration.

aaa_elflibs-10.2.0-i486-3
aalib-1.4rc5-i386-1
atk-1.9.1-i486-1
gimp-print-4.2.7-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
lcms-1.14-i486-1
libart_lgpl-2.3.17-i486-1
libexif-0.6.12-i486-2
libxml2-2.6.22-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
sane-1.0.16-i486-1
xsane-0.97-i486-1
gimp-print-4.2.7-i486-1

gimp-print (IJS printer driver for Ghostscript and CUPS)

Gimp-Print is the print facility for the Gimp, and in addition a suite of drivers that may be used with common UNIX spooling systems using Ghostscript or CUPS. These drivers provide printing quality for Linux in many cases equal to or better than proprietary vendor-supplied drivers, and can be used for many of the most demanding printing tasks.

aaa_elflibs-10.2.0-i486-3
openssl-0.9.7g-i486-2
gimp-2.2.8-i486-1
glib-1.2.10-i386-2

glib (library of C routines)

GLib is a library which includes support routines for C such as lists, trees, hashes, memory allocation, and many other things.

GLib is required by nearly everything that uses GTK+.

- gtk+-1.2.10-i386-3
mp3info-0.8.4-i486-1sam
nmap-3.93-i486-1
sagcad-0.9.6-i486-1dow
wmclockmon-0.8.0-i386-2bzh
xmms-1.2.10-i486-3
xmms-crossfade-0.3.6-i686-1
xmms-wma-1.0.3-i486-1cy
glib2-2.8.3-i686-1dow

glib2 (library of C routines)

GLib is a library which includes support routines for C such as lists, trees, hashes, memory allocation, and many other things.

Packaged by Mounir AITTAHAR <downwater@free.fr>

- aaa_elflibs-10.2.0-i486-3
abiword-2.4-i686-1dow
aMule-2.0.3-i686-1thee
atk-1.9.1-i486-1
dia-0.94-i486-1ota
enchant-1.1.6-i486-1rsa
gconf-2.6.2-i486-1
gftp-2.0.18-i486-1
gimp-2.2.8-i486-1
glibmm-2.8.1-i686-1dow
gliv-1.9.3-i486-1dow
gnome-keyring-0.2.1-i486-1
gnome-vfs-2.6.1.1-i486-3ccg
gnumeric-1.4.0-i486-1rsa
gtk+2-2.6.10-i486-1
gtkmm-2.6.5-i686-1dow
gucharmap-1.4.1-i486-2
inkscape-0.42.2-i486-2arf
libbonobo-2.8.0-i486-2jim
libbonoboui-2.6.1-i486-1
libglade-2.4.2-i486-1
libgnome-2.6.1.1-i486-2
libgnomecanvas-2.6.1.1-i486-1
libgnomeprint-2.6.1-i486-1
libgnomeprintui-2.6.1-i486-1
libgnomeui-2.6.1.1-i486-1
libgsf-1.12.1-i486-1
libidl-0.8.5-i486-1
libxml++-2.12.0-i486-1dow
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mplayerplug-in-2.75-i486-1tsu
NVidia-1.0.7676-ix86-1dow
orbit2-2.10.2-i486-1
pango-1.8.2-i486-1
sane-1.0.16-i486-1
sodipodi-0.34-i486-2gen
synfig_core-0.61.01-i486-1dow
synfig_studio-0.61.01-i486-1dow
wv-1.0.3-i486-1kjz
wxGTK2-2.6.1-i686-1thee
xchat-2.4.5-i486-1
xmms-1.2.10-i486-3
xsane-0.97-i486-1
glibc-2.3.5-i486-5

glibc (GNU C libraries)

This package contains the GNU C libraries and header files. The GNU C library was written originally by Roland McGrath, and is currently maintained by Ulrich Drepper. Some parts of the library were contributed or worked on by other people.

You'll need this package to compile programs.

- glibc-solibs-2.3.5-i486-5
glibc-solibs-2.3.5-i486-5

glibc-solibs (shared GNU C libraries)

This package contains the shared libraries, binaries, and support files required to run most Linux applications linked with glibc.

glibc-2.3.5-i486-5
-
glibc-zoneinfo-2.3.5-noarch-5

glibc-zoneinfo (time zone database)

This package allows you to configure your time zone.

This database comes from glibc, and is based on the tzdata package by Arthur David Olson et.al. The latest version and more information may be found at ftp://elsie.nci.nih.gov/pub/

Use the timeconfig utility to set your local time zone.

- -
glibmm-2.8.1-i686-1dow

glibmm is a set of C++ bindings for glib, including cross-platform APIs such as a std::string-like UTF8 string class, string utility methods, such as a text encoding converter API, file access, and threads.

Packaged by Mounir AITTAHAR <downwater@free.fr>

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
glib2-2.8.3-i686-1dow
libsigc++-2.0.16-i686-1dow
gtkmm-2.6.5-i686-1dow
inkscape-0.42.2-i486-2arf
libxml++-2.12.0-i486-1dow
synfig_core-0.61.01-i486-1dow
synfig_studio-0.61.01-i486-1dow
gliv-1.9.3-i486-1dow

GLiv is an OpenGL image viewer, image loading is done via Gdk-pixbuf bundled with GTK+-2.4, rendering with OpenGL and the graphical user interface uses GTK+ with GtkGLExt.

GLiv is very fast and smooth at rotating, panning and zooming if you have an OpenGL accelerated graphics board. It supports thumbnails and navigating through them using two images menus.

Packaged by Downwater <downwater@free.fr>

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
cxxlibs-5.0.7-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
gtkglext-1.0.6-i486-1dow
NVidia-1.0.7676-ix86-1dow
pango-1.8.2-i486-1
x11-6.8.2-i486-4
-
glut-3.7-i486-1

glut (3D graphics library)

GLUT is a 3D graphics library which uses the OpenGL API.

Some 3D programs might need this to run or compile.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
NVidia-1.0.7676-ix86-1dow
x11-6.8.2-i486-4
libtiff-3.7.3-i486-1
Wine-20041019-i486-S10nodebug
gmime-2.1.9-i486-1rsa

GMime (Utilities for parsing and creating messages using MIME)

GMime is a set of utilities for parsing and creating messages using the Multipurpose Internet Mail Extension (MIME).

Packaged by R S Ananda Murthy on a stock Slackware 10 system.

aaa_elflibs-10.2.0-i486-3
-
gnome-keyring-0.2.1-i486-1
Doesn't exist in Slackware 10.2

gnome-keyring (GNOME keyring system)

gnome-keyring keeps session passwords and other secrets, and provides a library for applications to integrate with the gnome keyring system.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
gnumeric-1.4.0-i486-1rsa
libgnomeui-2.6.1.1-i486-1
gnome-vfs-2.6.1.1-i486-3ccg

gnome-vfs (GNOME Virtual File System)

This is the GNOME Virtual File System, currently used as one of the foundations of the Nautilus file manager.

(Recompiled with FAM support.)

Package by Chad Glendenin

aaa_elflibs-10.2.0-i486-3
cdparanoia-IIIalpha9.8-i386-1
gconf-2.6.2-i486-1
glib2-2.8.3-i686-1dow
libbonobo-2.8.0-i486-2jim
libxml2-2.6.22-i486-1
openssl-0.9.7g-i486-2
orbit2-2.10.2-i486-1
samba-3.0.20b-i486-1
gnumeric-1.4.0-i486-1rsa
libbonoboui-2.6.1-i486-1
libgnome-2.6.1.1-i486-2
libgnomeui-2.6.1.1-i486-1
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
gnu-gs-fonts-6.0-noarch-1

gnu-gs-fonts (fonts for the Ghostscript interpreter)

These fonts are used by the GhostScript interpreter. They come from the gnu-gs-fonts-std and gnu-gs-fonts-other font archives.

- -
gnumeric-1.4.0-i486-1rsa

Gnumeric (A spreadsheet)

A computer program used to manipulate and analyze numeric data. Gnumeric can help you keep track of information in lists, organize numeric values in columns and rows, perform and update complex calculations by defining each step of the calculation and modifying particular steps subsequently, create and display or print graphical plots of data using bar plots, line graphs, pie charts or radar charts, implement complex optimization modeling.

Packaged by R S Ananda Murthy on an up-to-date Slackware 10 system.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
audiofile-0.2.6-i486-1
esound-0.2.36-i486-1
gconf-2.6.2-i486-1
glib2-2.8.3-i686-1dow
gnome-keyring-0.2.1-i486-1
gnome-vfs-2.6.1.1-i486-3ccg
gtk+2-2.6.10-i486-1
libart_lgpl-2.3.17-i486-1
libbonobo-2.8.0-i486-2jim
libbonoboui-2.6.1-i486-1
libglade-2.4.2-i486-1
libgnome-2.6.1.1-i486-2
libgnomecanvas-2.6.1.1-i486-1
libgnomeprint-2.6.1-i486-1
libgnomeprintui-2.6.1-i486-1
libgnomeui-2.6.1.1-i486-1
libgsf-1.12.1-i486-1
libxml2-2.6.22-i486-1
openssl-0.9.7g-i486-2
orbit2-2.10.2-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
-
gphoto2-2.1.5-i486-1asz

gphoto2

gphoto2 is the command line interface to libgphoto2. It allows almost everything that libgphoto2 can do.

http://www.gphoto.org/

This version of gphoto2 was complied for Slackware 10.0 by Andrzej Szelachowski

aaa_elflibs-10.2.0-i486-3
libexif-0.6.12-i486-2
libgphoto2-2.1.5-i486-1asz
-
gpm-1.19.6-i486-6

gpm (general purpose mouse server)

The general purpose mouse server, or gpm, allows you to use the mouse to cut and paste text from the screen. It also acts as a mouse server for applications running on the Linux console, such as the Midnight Commander file manager.

NOTE: This program may cause problems when you start X on systems that do not use a serial mouse. If you get an 'unable to open mouse device' error from X, disable /etc/rc.d/rc.gpm.

aaa_elflibs-10.2.0-i486-3
-
grep-2.5-i386-2

grep (print lines matching a pattern)

This is GNU grep, the "fastest grep in the west" (we hope). Grep searches through textual input for lines which contain a match to a specified pattern and then prints the matching lines.

- -
groff-1.19.1-i486-3

groff (document formatting system)

The GNU groff package provides versions of troff, nroff, eqn, tbl, and other Unix text-formatting utilities. Groff is used to 'compile' man pages stored in groff/nroff format into a form which can be printed or displayed on the screen. These man pages are stored in compressed form in the /usr/man/man1 /usr/man/man2 /usr/man/man3 /usr/man/man4 /usr/man/man5 /usr/man/man6 /usr/man/man7 /usr/man/man8 /usr/man/man9 /usr/man/mann directories.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
x11-6.8.2-i486-4
-
gtk+-1.2.10-i386-3

gtk+ (graphical user interface toolkit)

GTK+, which stands for the Gimp ToolKit, is a library for creating graphical user interfaces for the X Window System. This library is needed for GIMP (the GNU Image Manipulation Program), Mozilla, and many other X programs, including most of the programs from the GNOME project.

glib-1.2.10-i386-2
x11-6.8.2-i486-4
mp3info-0.8.4-i486-1sam
nmap-3.93-i486-1
sagcad-0.9.6-i486-1dow
wmclockmon-0.8.0-i386-2bzh
xmms-1.2.10-i486-3
xmms-crossfade-0.3.6-i686-1
xmms-wma-1.0.3-i486-1cy
gtk+2-2.6.10-i486-1

GTK+ version 2

This is GTK+, a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK+ is suitable for projects ranging from small one-off projects to complete application suites.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
glib2-2.8.3-i686-1dow
pango-1.8.2-i486-1
x11-6.8.2-i486-4
abiword-2.4-i686-1dow
aMule-2.0.3-i686-1thee
dia-0.94-i486-1ota
gconf-2.6.2-i486-1
gftp-2.0.18-i486-1
gimp-2.2.8-i486-1
gliv-1.9.3-i486-1dow
gnome-keyring-0.2.1-i486-1
gnumeric-1.4.0-i486-1rsa
gtkmm-2.6.5-i686-1dow
gucharmap-1.4.1-i486-2
inkscape-0.42.2-i486-2arf
libbonoboui-2.6.1-i486-1
libglade-2.4.2-i486-1
libgnomecanvas-2.6.1.1-i486-1
libgnomeprintui-2.6.1-i486-1
libgnomeui-2.6.1.1-i486-1
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mplayerplug-in-2.75-i486-1tsu
NVidia-1.0.7676-ix86-1dow
sane-1.0.16-i486-1
sodipodi-0.34-i486-2gen
synfig_studio-0.61.01-i486-1dow
wxGTK2-2.6.1-i686-1thee
xchat-2.4.5-i486-1
xsane-0.97-i486-1
gtkglext-1.0.6-i486-1dow

GtkGLExt is an OpenGL extension to GTK+ 2.0 or later.

It provides additional GDK objects which support OpenGL rendering in GTK+, and GtkWidget API add-ons to make GTK+ widgets OpenGL-capable.

As opposed to Jane Loff's GtkGLArea , it provides not an OpenGL widget, but an additional GtkWidget API which enables the standard (and custom) GTK+ widgets to render 3D scene using OpenGL.

Packaged by Downwater <downwater@free.fr>

x11-6.8.2-i486-4
xkb-tifinagh-6.8.1-ix86-1dow
gliv-1.9.3-i486-1dow
gtkmm-2.6.5-i686-1dow

gtkmm is the official C++ interface for the popular GUI library GTK+. Highlights include typesafe callbacks, widgets extensible via inheritance and a comprehensive set of widgets. You can create user interfaces either in code or with the Glade designer, using libglademm. Here's an overview, with documentation and status. gtkmm is free software distributed under the GNU Library General Public License (LGPL).

Packaged by Mounir AITTAHAR <downwater@free.fr>

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
cxxlibs-5.0.7-i486-1
glib2-2.8.3-i686-1dow
glibmm-2.8.1-i686-1dow
gtk+2-2.6.10-i486-1
libsigc++-2.0.16-i686-1dow
pango-1.8.2-i486-1
x11-6.8.2-i486-4
inkscape-0.42.2-i486-2arf
synfig_studio-0.61.01-i486-1dow
gucharmap-1.4.1-i486-2

gucharmap (character map utility)

gucharmap is a Unicode character map and font viewer.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
abiword-2.4-i686-1dow
gv-3.6.0-i386-1pvm

gv-3.6.0 a user interface for the ghostscript interpreter

gv allows to view and navigate through PostScript and PDF documents on an X display by providing a user interface for the ghostscript interpreter.

Development Status : 5 - Production/Stable

Homepage: http://www.gnu.org/software/gv/

x11-6.8.2-i486-4
xaw3d-1.5-i386-3
-
gzip-1.3.3-i386-2

gzip (file compression utility)

Gzip reduces the size of the named files using Lempel-Ziv coding (LZ77). Whenever possible, each file is replaced by one with the extension .gz, while keeping the same ownership modes, access and modification times.

- -
hplip-0.9.2-i486-1kjz

hplip - Hewlett Packard Linux Imaging and Printing project

This package provides a unified single and multi-function connectivity solution for Linux. The goal of this project is to provide very simple printing, faxing, scanning, photo-card access, and device management to end users.

HPLIP is comprised of several major component: applications, driver, backend, daemons, and PPD files. HPLIP works with the CUPS system.

Packaged by Ken Zalewski (kennyz@nycap.rr.com)

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
net-snmp-5.1.1-i486-1rob
openssl-0.9.7g-i486-2
-
imagemagick-6.2.3_3-i486-1

imagemagick (a robust collection of image processing tools)

ImageMagick is a collection of tools for manipulating and displaying digital images. It can merge images, transform image dimensions, do screen captures, create animation sequences, and convert between many different image formats.

ImageMagick was written by John Cristy of ImageMagick Studio.

Home page: http://www.imagemagick.org/

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
lcms-1.14-i486-1
libtool-1.5.20-i486-1
libxml2-2.6.22-i486-1
x11-6.8.2-i486-4
-
indent-2.2.9-i386-1

indent (changes the appearance of a C program)

GNU indent changes the appearance of a C program by inserting or deleting whitespace according to a plethora of options. Some canned styles of formatting (like the GNU style, Kernighan & Ritchie style, and original Berkeley style) are supported as well.

GNU indent is a descendant of BSD indent.

- -
infozip-5.52-i486-1

infozip (Info-ZIP's zip and unzip utilities)

zip is a compression and file packaging utility for Unix, VMS, MSDOS, OS/2, Windows NT, Minix, Atari and Macintosh, Amiga and Acorn RISC OS. It is analogous to a combination of the UNIX commands tar(1) and compress(1) and is compatible with PKZIP (Phil Katz's ZIP). A companion program (unzip(1L)), unpacks zip archives.

- -
inkscape-0.42.2-i486-2arf

inkscape-0.42.2 An SVG editor

Inkscape is an SVG editor with capabilities similar to CorelDraw, Illustrator, etc. Needs gc, libsigc++, gtkmm, glibmm.

Packed by Fred Broders (fredbroders@altern.org)

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
cxxlibs-5.0.7-i486-1
gc-6.6-i686-1dow
glib2-2.8.3-i686-1dow
glibmm-2.8.1-i686-1dow
gtk+2-2.6.10-i486-1
gtkmm-2.6.5-i686-1dow
libsigc++-2.0.16-i686-1dow
libxml2-2.6.22-i486-1
libxslt-1.1.15-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
-
iptables-1.3.3-i486-1

iptables (IP packet filter administration)

iptables is a packet filter administration tool for Linux 2.4, replacing the ipchains tool that was used with the 2.2 kernel. The iptables tool is used to set up, maintain, and inspect the tables of IP packet filter rules in the Linux kernel for packet filtering, firewalling, and NAT (Network Address Translation).

If you plan to set up a firewall with Linux 2.4, you'll need this.

xkb-tifinagh-6.8.1-ix86-1dow
-
isapnptools-1.26-i386-1

isapnptools (ISA Plug-And-Play tools)

These programs allow ISA Plug-And-Play devices to be configured on a Linux machine.

- -
j2sdk-1_4_2_04-i586-3
Doesn't exist in Slackware 10.2

Java(TM) 2 Software Development Kit Standard Edition, Version 1.4.2_04

The Java 2 SDK software includes tools for developing, testing, and running programs written in the Java programming language. This package contains everything you need to run Java(TM).

For additional information, refer to this Sun Microsystems web page: http://java.sun.com/

aaa_elflibs-10.2.0-i486-3
x11-6.8.2-i486-4
-
jed-0.99_16-i486-1

jed (programmer's editor)

JED (by John E. Davis) is an extremely powerful but small emacs-like programmer's editor that is extensible in a C-like macro language and can do color syntax highlighting. Among the many features: Emacs, wordstar, EDT emulation; C, Fortran, TeX, text editing modes; Full undo; GNU Emacs compatible info reader, and lots more.

JED is also 8 bit clean, so you can even edit binary files!

aaa_elflibs-10.2.0-i486-3
-
kbd-1.12-i486-2

kbd (keyboard maps and console fonts)

Load and save keyboard mappings. Needed if you are not using the US keyboard map. This package also contains utilities to change your console fonts - if you install it you'll get a menu later on that lets you select from many different fonts. If you like one, you can make it your default font. A new default font can be chosen at any time by typing 'setconsolefont'.

- -
lame-3.96.1-i486-1pcx

lame 3.96.1

LAME (LAME Ain't an MP3 Encoder) is a research project for learning about and improving MP3 encoding technoligy. LAME includes an mp3 encoding library, simple front end application, a much-improved psycho-acoustic model (GPSYCHO), and a graphical frame analyzer (MP3x). Please note that any commercial use (including distributing the LAME encoding engine in a free encoder) may require a patent license from Thomson Multimedia.

aaa_elflibs-10.2.0-i486-3
mplayer-1.0pre7try2-i686-1dow
lcms-1.14-i486-1

lcms (little cms engine)

Little cms is a small, speed optimized color management engine.

lcms was written by Marti Maria <marti@littlecms.com>.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
gimp-2.2.8-i486-1
imagemagick-6.2.3_3-i486-1
less-382-i486-1

less (file pager)

Less is a paginator similar to more (1), but which allows backward movement in the file as well as forward movement. Also, less does not have to read the entire input file before starting, so with large input files it starts up faster than text editors like vi (1).

Less was written by Mark Nudelman.

aaa_elflibs-10.2.0-i486-3
-
lesstif-0.94.4-i486-1

lesstif (a free replacement for OSF/Motif(R))

LessTif is the Hungry Programmers' (www.hungry.com) free clone of Motif(R). It aims to be source compatible with OSF/Motif(R) meaning that the same source code should compile with both and work exactly the same. This package contains the libraries and header files to be able to run and compile Motif applications, along with the lesstif version of mwm, the Motif window manager.

aaa_elflibs-10.2.0-i486-3
x11-6.8.2-i486-4
tetex-3.0-i486-1
xawtv-3.95-i686-1dow
libart_lgpl-2.3.17-i486-1

libart_lgpl

Libart is a library for high-performance 2D graphics. It is used by both KDE and GNOME. This is the LGPL'd component of the library, which includes the functions needed for running the GNOME canvas and for printing support.

Raph Levien <raph@acm.org> is the author of libart.

- abiword-2.4-i686-1dow
dia-0.94-i486-1ota
gimp-2.2.8-i486-1
gnumeric-1.4.0-i486-1rsa
libbonoboui-2.6.1-i486-1
libgnomecanvas-2.6.1.1-i486-1
libgnomeprint-2.6.1-i486-1
libgnomeprintui-2.6.1-i486-1
libgnomeui-2.6.1.1-i486-1
sodipodi-0.34-i486-2gen
libbonobo-2.8.0-i486-2jim

libbonobo 2.8.0

The bonobo library supports independant CORBA interfaces for creating reusable components. It provides GNOME with a framework for handling compound documents, such as embedding a spreadsheet in a word processor document.

aaa_elflibs-10.2.0-i486-3
glib2-2.8.3-i686-1dow
libxml2-2.6.22-i486-1
orbit2-2.10.2-i486-1
gnome-vfs-2.6.1.1-i486-3ccg
gnumeric-1.4.0-i486-1rsa
libbonoboui-2.6.1-i486-1
libgnome-2.6.1.1-i486-2
libgnomeui-2.6.1.1-i486-1
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
libbonoboui-2.6.1-i486-1
Doesn't exist in Slackware 10.2

libbonoboui

The bonobo library supports independant CORBA interfaces for creating reusable components. It provides GNOME with a framework for handling compound documents, such as embedding a spreadsheet in a word processor document.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
audiofile-0.2.6-i486-1
esound-0.2.36-i486-1
gconf-2.6.2-i486-1
glib2-2.8.3-i686-1dow
gnome-vfs-2.6.1.1-i486-3ccg
gtk+2-2.6.10-i486-1
libart_lgpl-2.3.17-i486-1
libbonobo-2.8.0-i486-2jim
libglade-2.4.2-i486-1
libgnome-2.6.1.1-i486-2
libgnomecanvas-2.6.1.1-i486-1
libxml2-2.6.22-i486-1
openssl-0.9.7g-i486-2
orbit2-2.10.2-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
gnumeric-1.4.0-i486-1rsa
libgnomeui-2.6.1.1-i486-1
libdockapp-0.4.0-i386-1bzh

libdockapp 0.4.0

Simple library that eases the creation of Window Maker dockapps. It provides functions that set up a dockapp in such a way that they can be properly docked. It also provides some event handlers. Notice that newer versions are available here : http://solfertje.student.utwente.nl/~dalroi/libdockapp/ v0.4.0 is needed to make wmnetload 1.3 work.

Package created for Slackware by niouls (niouls@gmx.net)

x11-6.8.2-i486-4
wmnetload-1.3-i386-1bzh
libexif-0.6.12-i486-2

libexif

EXIF stands for Exchangeable Image File Format, which is a format used to store extra information in images such as the JPEG files produced by digital cameras. The libexif library allows programs such as gthumb to parse, edit, and save EXIF data.

- gimp-2.2.8-i486-1
gphoto2-2.1.5-i486-1asz
libgphoto2-2.1.5-i486-1asz
libgcrypt-1.2.0-i486-1jim

libgcrypt 1.2.0 (The GNU crypto library)

Libgcrypt is a general purpose crypto library based on the code used in GnuPG.

libgpg-error-1.0-i486-1rob
-
libglade-2.4.2-i486-1

libglade

The GLADE library allows loading user interfaces which are stored externally into a program. This allows the interface to be changed without recompiling the program. The interfaces can also be edited with GLADE.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
libxml2-2.6.22-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
abiword-2.4-i686-1dow
gnumeric-1.4.0-i486-1rsa
libbonoboui-2.6.1-i486-1
libgnomecanvas-2.6.1.1-i486-1
libgnomeui-2.6.1.1-i486-1
libgnome-2.6.1.1-i486-2
Doesn't exist in Slackware 10.2

libgnome

Libraries needed for GNOME.

aaa_elflibs-10.2.0-i486-3
audiofile-0.2.6-i486-1
esound-0.2.36-i486-1
gconf-2.6.2-i486-1
glib2-2.8.3-i686-1dow
gnome-vfs-2.6.1.1-i486-3ccg
libbonobo-2.8.0-i486-2jim
libxml2-2.6.22-i486-1
openssl-0.9.7g-i486-2
orbit2-2.10.2-i486-1
gnumeric-1.4.0-i486-1rsa
libbonoboui-2.6.1-i486-1
libgnomeui-2.6.1.1-i486-1
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
libgnomecanvas-2.6.1.1-i486-1
Doesn't exist in Slackware 10.2

libgnomecanvas

This is the GNOME Canvas Library.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
libart_lgpl-2.3.17-i486-1
libglade-2.4.2-i486-1
libxml2-2.6.22-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
abiword-2.4-i686-1dow
gnumeric-1.4.0-i486-1rsa
libbonoboui-2.6.1-i486-1
libgnomeprintui-2.6.1-i486-1
libgnomeui-2.6.1.1-i486-1
sodipodi-0.34-i486-2gen
libgnomeprint-2.6.1-i486-1
Doesn't exist in Slackware 10.2

libgnomeprint

Libgnomeprint is the non-GUI part of the printing libraries for GNOME applications.

aaa_elflibs-10.2.0-i486-3
glib2-2.8.3-i686-1dow
libart_lgpl-2.3.17-i486-1
libxml2-2.6.22-i486-1
openssl-0.9.7g-i486-2
pango-1.8.2-i486-1
x11-6.8.2-i486-4
abiword-2.4-i686-1dow
gnumeric-1.4.0-i486-1rsa
libgnomeprintui-2.6.1-i486-1
sodipodi-0.34-i486-2gen
libgnomeprintui-2.6.1-i486-1
Doesn't exist in Slackware 10.2

libgnomeprintui

libgnomeprintui is the GUI part of the printing libraries for GNOME applications.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
libart_lgpl-2.3.17-i486-1
libgnomecanvas-2.6.1.1-i486-1
libgnomeprint-2.6.1-i486-1
libxml2-2.6.22-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
abiword-2.4-i686-1dow
gnumeric-1.4.0-i486-1rsa
sodipodi-0.34-i486-2gen
libgnomeui-2.6.1.1-i486-1
Doesn't exist in Slackware 10.2

libgnomeui

User interface library needed for GNOME.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
audiofile-0.2.6-i486-1
esound-0.2.36-i486-1
gconf-2.6.2-i486-1
glib2-2.8.3-i686-1dow
gnome-keyring-0.2.1-i486-1
gnome-vfs-2.6.1.1-i486-3ccg
gtk+2-2.6.10-i486-1
libart_lgpl-2.3.17-i486-1
libbonobo-2.8.0-i486-2jim
libbonoboui-2.6.1-i486-1
libglade-2.4.2-i486-1
libgnome-2.6.1.1-i486-2
libgnomecanvas-2.6.1.1-i486-1
libxml2-2.6.22-i486-1
openssl-0.9.7g-i486-2
orbit2-2.10.2-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
gnumeric-1.4.0-i486-1rsa
libgpg-error-1.0-i486-1rob

libgpg-error

This is a library that defines common error values for all GnuPG components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard Daemon and possibly more in the future.

Packaged by: Robert Stan

- libgcrypt-1.2.0-i486-1jim
libgphoto2-2.1.5-i486-1asz

libgphoto2

libgphoto2 is the core of gphoto2 software. It is a portable library to gives access to more than 500 digital cameras.

http://www.gphoto.org/

This version of libgphoto2 was complied for Slackware 10.0 by Andrzej Szelachowski

aaa_elflibs-10.2.0-i486-3
libexif-0.6.12-i486-2
gphoto2-2.1.5-i486-1asz
libgsf-1.12.1-i486-1

libgsf

libgsf aims to provide an efficient extensible i/o abstraction for dealing with different structured file formats.

libgsf is used by AbiWord, Gnumeric, and KWord.

aaa_elflibs-10.2.0-i486-3
glib2-2.8.3-i686-1dow
libxml2-2.6.22-i486-1
gnumeric-1.4.0-i486-1rsa
libiconv-1.9.1-i486-1rsa

libiconv (A program to convert text from one encoding to another)

This program can convert text from one encodings to any other, through Unicode conversion. libiconv is for you if your application needs to support multiple character encodings, but that support lacks from your system.

Packaged by R S Ananda Murthy on an up-to-date Slackware 10.1 system.

- abiword-2.4-i686-1dow
libidl-0.8.5-i486-1

libIDL

libIDL is a library licensed under the GNU LGPL for creating trees of CORBA Interface Definition Language (IDL) files, which is a specification for defining portable interfaces.

The Mozilla suite uses libIDL.

glib2-2.8.3-i686-1dow
orbit2-2.10.2-i486-1
libidn-0.5.17-i486-1

libidn (GNU Internationalized Domain Name library)

GNU Libidn is an implementation of the Stringprep, Punycode and IDNA specifications defined by the IETF Internationalized Domain Names (IDN) working group, used for internationalized domain names.

- aaa_elflibs-10.2.0-i486-3
php-apache2-5.0.3-i486-1spi
libieee1284-0.2.10-i486-1

libieee1284

This library is intended to be used by applications that need to communicate with (or at least identify) devices that are attached via a parallel port. For example, SANE uses it to identify scanners.

- sane-1.0.16-i486-1
Wine-20041019-i486-S10nodebug
xsane-0.97-i486-1
libjpeg-6b-i386-4

libjpeg (Independent JPEG Group's JPEG software)

Software to implement JPEG image compression and decompression. JPEG (pronounced 'jay-peg') is a standardized compression method for full-color and gray-scale images. JPEG is intended for compressing 'real-world' scenes; cartoons and other non-realistic images are not its strong suit. JPEG is lossy, however, on typical images of real-world scenes, very good compression levels can be obtained with no visible change, and amazingly high compression levels are possible if you can tolerate a low-quality image.

- -
libmad-0.15.1b-i486-1

libmad (high-quality MPEG audio library)

MAD (libmad) is a high-quality MPEG audio decoder. It currently supports MPEG-1 and the MPEG-2 extension to Lower Sampling Frequencies, as well as the so-called MPEG 2.5 format. All three audio layers (Layer I, Layer II, and Layer III a.k.a. MP3) are fully implemented. Because MAD provides full 24-bit PCM output, applications using MAD are able to produce high quality audio. MAD is distributed under the terms of the GPL.

MAD (libmad) was written by Robert Leslie.

- mplayer-1.0pre7try2-i686-1dow
sox-12.17.8-i486-1
libmikmod-3.1.11a-i486-1syn

libmikmod 3.1.11a sound library

A portable sound library for Unix and other systems.

Package Created By: Maxym Synytsky

- sdl-1.2.9-i486-1
xmms-1.2.10-i486-3
libmimic-1.0.3-i486-1dow

libmimic is an open source video encoding/decoding library for Mimic V2.x- encoded content (fourCC: ML20), which is the encoding used by MSN Messenger for webcam conversations.

It was written because there was no third-party MSN-client that supported this feature due to this proprietary/unknown codec involved. I didn't like this lack of interoperability, so I decided to do something about it. After studying the official MSN-client a little closer, it became clear that

the codec involved was statically linked into the executable, so there was no easy way to use the codec code through Wine. So for fun, and challenge, reverse-engineered the original implementation by studying the massive amount of assembly code involved, and after a lot of hard work I ended up with this implementation in C.

It should be noted that reverse-engineering for interoperability is 100% legal here in Norway (and in most European countries).

Special thanks to Rob Taylor and the rest of the Farsight-team for all the feedback and inspiration during development, you guys rock! :-)

If you like my work and decide to use it in your project, please feel free to credit me. I put a lot of time and hard work into this, so I hope others will find it useful.

Well, enough chit chat, enjoy! :-)

Ole André Vadla Ravnås oleavr at gmail dot com

- -
libogg-1.1.2-i486-1

libogg (Ogg Bitstream library)

Libogg is a library for manipulating ogg bitstreams. It handles both making ogg bitstreams and getting packets from ogg bitstreams.

libogg is needed to use the Ogg Vorbis audio format.

- libvorbis-1.1.1-i486-1
sdl-1.2.9-i486-1
SDL_mixer-1.2.5-i686-3jto
sox-12.17.8-i486-1
speex-1.1.6-i486-1rob
xmms-1.2.10-i486-3
libpng-1.2.8-i486-1

libpng (Portable Network Graphics library)

PNG (Portable Network Graphics) is an extensible file format for the lossless, portable, well-compressed storage of raster images. PNG provides a patent-free replacement for GIF and can also replace many common uses of TIFF. Indexed-color, grayscale, and truecolor images are supported, plus an optional alpha channel. Sample depths range from 1 to 16 bits.

- -
libsigc++-2.0.16-i686-1dow

libsigc++

libsigc++ implements a full callback system for use in abstract interfaces and general programming. It is the most complete library of its kind with the ability to connect an abstract callback to a class method, function, or function object. It contains adaptor classes for connecting dissimilar callbacks and has an ease of use unmatched by other C++ callback libraries.

Packaged by Mounir AITTAHAR <downwater@free.fr>

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
glibmm-2.8.1-i686-1dow
gtkmm-2.6.5-i686-1dow
inkscape-0.42.2-i486-2arf
libxml++-2.12.0-i486-1dow
synfig_core-0.61.01-i486-1dow
synfig_studio-0.61.01-i486-1dow
libtiff-3.7.3-i486-1

libtiff (a library for reading and writing TIFF files)

This package provides support for the Tag Image File Format (TIFF), a widely used format for storing image data. Included is the libtiff library (for reading and writing TIFF files), and a collection of tools for working with TIFF images.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
glut-3.7-i486-1
NVidia-1.0.7676-ix86-1dow
x11-6.8.2-i486-4
-
libtool-1.5.20-i486-1

libtool (a generic library support script)

This is GNU Libtool, a generic library support script. Libtool hides the complexity of using shared libraries behind a consistent, portable interface. To use libtool, add the new generic library building commands to your Makefile, Makefile.in, or Makefile.am. See the documentation for details.

You must install the "m4" package to be able to use libtool.

- imagemagick-6.2.3_3-i486-1
libungif-4.1.3-i486-1

libungif

GIF loading and saving shared library. (Saving uses an uncompressed GIF algorithm that does not use LZW compression.)

- emacs-21.4a-i486-2
mplayer-1.0pre7try2-i686-1dow
windowmaker-0.92.0-i486-1
libvorbis-1.1.1-i486-1

libvorbis (Ogg Vorbis library)

This library supports the Vorbis General Audio Compression Codec (commonly known as Ogg Vorbis). Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free, general-purpose compressed audio format for audio and music at fixed and variable bitrates.

The libvorbis library requires libao and libogg. You'll find some basic tools for creating and using Ogg Vorbis files in the vorbis-tools package.

libogg-1.1.2-i486-1
sdl-1.2.9-i486-1
SDL_mixer-1.2.5-i686-3jto
sox-12.17.8-i486-1
xmms-1.2.10-i486-3
libxml++-2.12.0-i486-1dow

Libxml++ is a C++ wrapper for the libxml XML parser library. Its original author is Ari Johnson and it is currently maintained by Christophe de Vienne and Murray Cumming.

Packaged by Mounir AITTAHAR <downwater@free.fr>

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
glib2-2.8.3-i686-1dow
glibmm-2.8.1-i686-1dow
libsigc++-2.0.16-i686-1dow
libxml2-2.6.22-i486-1
synfig_core-0.61.01-i486-1dow
synfig_studio-0.61.01-i486-1dow
libxml2-2.6.22-i486-1

libxml2 (XML parser library)

XML parser library.

aaa_elflibs-10.2.0-i486-3
abiword-2.4-i686-1dow
dia-0.94-i486-1ota
gconf-2.6.2-i486-1
gimp-2.2.8-i486-1
gnome-vfs-2.6.1.1-i486-3ccg
gnumeric-1.4.0-i486-1rsa
imagemagick-6.2.3_3-i486-1
inkscape-0.42.2-i486-2arf
libbonobo-2.8.0-i486-2jim
libbonoboui-2.6.1-i486-1
libglade-2.4.2-i486-1
libgnome-2.6.1.1-i486-2
libgnomecanvas-2.6.1.1-i486-1
libgnomeprint-2.6.1-i486-1
libgnomeprintui-2.6.1-i486-1
libgnomeui-2.6.1.1-i486-1
libgsf-1.12.1-i486-1
libxml++-2.12.0-i486-1dow
libxslt-1.1.15-i486-1
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
php-apache2-5.0.3-i486-1spi
sodipodi-0.34-i486-2gen
synfig_core-0.61.01-i486-1dow
synfig_studio-0.61.01-i486-1dow
libxslt-1.1.15-i486-1

libxslt (XML transformation library)

XSLT support for libxml2. (XSLT is a language used for transforming XML documents)

aaa_elflibs-10.2.0-i486-3
libxml2-2.6.22-i486-1
dia-0.94-i486-1ota
inkscape-0.42.2-i486-2arf
php-apache2-5.0.3-i486-1spi
lilo-22.5.9-i486-2

lilo (Linux Loader)

Generic Boot Loader for Linux ('LInux LOader') by Werner Almesberger. LILO boots Linux from your hard drive. It can also boot other operating systems such as MS-DOS and OS/2, and can even boot DOS from the second hard drive. LILO comes with utilities and documentation that make it easier to install, such as 'liloconfig' and 'QuickStart'. NOTE: Installing boot loaders is inherently dangerous. Be sure to have some means to boot your system from a different media if you install LILO on your hard disk.

- -
lsof-4.72-i486-1

lsof (list open files)

Lsof is a Unix-specific tool. Its name stands for "LiSt Open Files", and it does just that. It lists information about files that are open by the processes running on the system.

Victor A. Abell of Purdue University is the developer of lsof.

- -
lynx-2.8.5rel.5-i486-1

Lynx (text mode browser)

Lynx is a distributed hypertext browser with full World Wide Web capabilities. Lynx can be used to access information on the World Wide Web, or to build information systems intended primarily for local access. For example, Lynx has been used to build several Campus Wide Information Systems (CWIS).

Lynx's authors include Lou Montulli, Garrett Blythe, Craig Lavender, Michael Grobe, and Charles Rezac.

aaa_elflibs-10.2.0-i486-3
openssl-0.9.7g-i486-2
-
m4-1.4.2-i486-1

m4 (an implementation of the UNIX macro processor)

This is GNU m4, a program which copies its input to the output, expanding macros as it goes. m4 has built-in functions for including named files, running commands, doing integer arithmetic, manipulating text in various ways, recursion, etc... Macros can also be user- defined, and can take any number of arguments.

GNU 'm4' was originally written by Rene Seindal, from Denmark.

- -
make-3.80-i386-1

make (GNU make utility to maintain groups of programs)

This is the GNU implementation of make, which was written by Richard Stallman and Roland McGrath. The purpose of the make utility is to determine automatically which pieces of a large program need to be recompiled, and issue the commands to recompile them.

This is needed to compile just about any major C program, including the Linux kernel.

- -
man-1.5p-i486-1

man (format and display the on-line manual pages)

The man package is a collection of tools used for searching and reading the online system documentation. In fact, on most UNIX-like operating systems it is the primary means of finding out how programs on the system work. For example, 'man man' will display the documentation for man itself.

Man requires the groff text processing package.

- -
man-pages-1.64-noarch-1

man-pages (system documentation)

Man pages are online documentation for Linux. This package includes many section 1, 2, 3, 4, 5, 7, and 8 man pages for Linux.

The man-pages distribution is maintained by Andries E. Brouwer with the help of more writers, editors, and other contributors than we can name here.

- -
manyfaqs

A collection of frequently asked questions/answers on many subjects.

Some of the FAQs included in this package:

ATAPI-FAQ, AfterStep-FAQ, BLFAQ (Brief Linux FAQ), Ftape-FAQ, GCC-SIG11-FAQ, Joe-Command-Reference, Linux-FAQ, PPP-FAQ, SMP-FAQ, and the Threads-FAQ.

These FAQs will be installed under /usr/doc/faq.

- -
mhash-0.9.2-i486-1

mhash (Thread-safe hash library)

mhash is a thread-safe hash library, implemented in C, and provides a uniform interface to a large number of hash algorithms (MD5, SHA-1, HAVAL, RIPEMD128, RIPEMD160, TIGER, GOST). These algorithms can be used to compute checksums, message digests, and other signatures. The HMAC support implements the basics for message authentication, following RFC 2104.

- php-apache2-5.0.3-i486-1spi
mini

Linux Mini-HOWTOs.

Short documentation files explaining many common Linux tasks.

These files will be installed in /usr/doc/Linux-mini-HOWTOs/.

- -
module-init-tools-3.1-i486-1

module-init-tools (kernel module utilities)

Utilities to load and unload kernel modules. These are used on Linux to load extra drivers or other features into the running kernel.

This package includes both module-init-tools (the module utilities for for 2.6.x Linux kernels) and modutils (for 2.4.x kernels).

- -
most-4.9.5-i486-1

most (another pager, like 'more' and 'less')

most is a paging program that displays, one windowful at a time, the contents of a file on a terminal. Unlike other well-known paging programs, most supports multiple windows and can scroll left and right. Why settle for less?

'most' was written by John E. Davis.

aaa_elflibs-10.2.0-i486-3
-
mozilla-firefox-1.0.7-i686-1

mozilla-firefox (Mozilla Firefox Web browser)

This project is a redesign of the Mozilla browser component written using the XUL user interface language. Firefox empowers you to browse faster, more safely and more efficiently than with any other browser.

Visit the Mozilla Firefox project online: http://www.mozilla.org/projects/firefox/

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
audiofile-0.2.6-i486-1
cxxlibs-5.0.7-i486-1
esound-0.2.36-i486-1
gconf-2.6.2-i486-1
glib2-2.8.3-i686-1dow
gnome-vfs-2.6.1.1-i486-3ccg
gtk+2-2.6.10-i486-1
libbonobo-2.8.0-i486-2jim
libgnome-2.6.1.1-i486-2
libxml2-2.6.22-i486-1
openssl-0.9.7g-i486-2
orbit2-2.10.2-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
-
mozilla-thunderbird-1.0.7-i686-1

mozilla-thunderbird (Mozilla Thunderbird mail application)

Mozilla Thunderbird is a redesign of the Mozilla mail component written using the XUL user interface language. Thunderbird makes emailing safer, faster, and easier than ever before with the industry's best implementations of features such as intelligent spam filters, built-in RSS reader, quick search, and much more.

Visit the Mozilla Thunderbird project online: http://www.mozilla.org/projects/thunderbird/

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
audiofile-0.2.6-i486-1
cxxlibs-5.0.7-i486-1
esound-0.2.36-i486-1
gconf-2.6.2-i486-1
glib2-2.8.3-i686-1dow
gnome-vfs-2.6.1.1-i486-3ccg
gtk+2-2.6.10-i486-1
libbonobo-2.8.0-i486-2jim
libgnome-2.6.1.1-i486-2
libxml2-2.6.22-i486-1
openssl-0.9.7g-i486-2
orbit2-2.10.2-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
-
mp3info-0.8.4-i486-1sam

mp3info - An MP3 technical info viewer and ID3 1.x tag editor

MP3Info is a little utility used to read and modify the ID3 tags of MP3 files. MP3Info can also display various techincal aspects of an MP3 file including playing time, bit-rate, sampling frequency and other attributes in a pre-defined or user-specifiable output format.

This package also contains a GUI version (gmp3info) that requires GTK libraries.

aaa_elflibs-10.2.0-i486-3
glib-1.2.10-i386-2
gtk+-1.2.10-i386-3
x11-6.8.2-i486-4
-
mplayer-1.0pre7try2-i686-1dow

MPlayer 1.0 prelease 7 try 2

MPlayer is a movie player for Linux (runs on many other Unices, and non-x86 CPUs, see the documentation). It plays dd most MPEG, VOB, AVI, Ogg/OGM, VIVO, ASF/WMA/WMV, QT/MOV/MP4, FLI, RM, NuppelVideo, YUV4MPEG, FILM, RoQ, PVA files, supported by many native, XAnim, and Win32 DLL codecs. You can watch VideoCD, SVCD, DVD, 3ivx, DivX 3/4/5 and even WMV movies, too (without the avifile library).

Another great feature of MPlayer is the wide range of supported output drivers. It works with X11, Xv, DGA, OpenGL, SVGAlib, fbdev, AAlib, DirectFB, but you can use GGI, SDL mplayer: (and this way all their drivers), VESA (on every VESA compatible card, even without X11!) and some low level card-specific drivers (for Matrox, 3Dfx and ATI), too! Most of them support software or hardware scaling, so you can enjoy movies in fullscreen. MPlayer supports displaying through some hardware MPEG decoder boards, such as the Siemens DVB, DXR2 and DXR3/Hollywood+.

MPlayer has an onscreen display (OSD) for status information, nice big antialiased shaded subtitles and visual feedback for keyboard controls. European/ISO 8859-1,2 (Hungarian, English, Czech, etc), Cyrillic and Korean fonts are supported along with 12 subtitle formats (MicroDVD, SubRip, OGM, SubViewer, Sami, VPlayer, RT, SSA, AQTitle, JACOsub, PJS and our own: MPsub). DVD subtitles mplayer: (SPU streams, VOBsub and Closed Captions) are supported as well.

Options : large files support, joystick control, xvmc support, french man pages. There is a bug which, depending on configuration, can lead to a heap overflow. If and under which circumstances this is exploitable is unclear to us as of now. this release is fix applied version.

Built by Downwater <downwater@free.fr>

aaa_elflibs-10.2.0-i486-3
aalib-1.4rc5-i386-1
audiofile-0.2.6-i486-1
cdparanoia-IIIalpha9.8-i386-1
cxxlibs-5.0.7-i486-1
esound-0.2.36-i486-1
lame-3.96.1-i486-1pcx
libmad-0.15.1b-i486-1
libungif-4.1.3-i486-1
NVidia-1.0.7676-ix86-1dow
sdl-1.2.9-i486-1
x11-6.8.2-i486-4
-
mplayerplug-in-2.75-i486-1tsu

MPlayerPlug-In 2.75

mplayerplug-in is a browser plugin that uses mplayer to play digital media from websites. This package is built for firefox (plugin files copied in /usr/lib/firefox/plugins).

Built by Matt Alone

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
cxxlibs-5.0.7-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
-
ncurses-5.4-i486-2

ncurses

The ncurses (new curses) library is a free software emulation of curses in System V Release 4.0, and more. It uses terminfo format, supports pads and color and multiple highlights and forms characters and function-key mapping, and has all the other SYSV-curses enhancements over BSD curses.

aaa_elflibs-10.2.0-i486-3
-
ndiswrapper-1.1-i686-1dow

Ndiswrapper 1.11

To load and run Windows XP drivers through NDIS protocol for wireless cards

Provides : tools to install Windows XP drivers and kernel 2.4.29 module to load the Windows XP drivers.

Packaged by Mounir AITTAHAR <mounir.aittahar@free.fr> for Slackware 10.1

- -
net-snmp-5.1.1-i486-1rob

net-snmp

Various tools relating to the Simple Network Management Protocol

Packaged by: Robert Stan

openssl-0.9.7g-i486-2
hplip-0.9.2-i486-1kjz
nmap-3.93-i486-1

nmap (network scanner)

Nmap ("Network Mapper") is an open source utility for network exploration or security auditing. It was designed to rapidly scan large networks, although it works fine against single hosts. Nmap uses raw IP packets in novel ways to determine what hosts are available on the network, what services (ports) they are offering, what operating system (and OS version) they are running, what type of packet filters/firewalls are in use, and dozens of other characteristics. Nmap runs on most types of computers, and both console and graphical versions are available.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
glib-1.2.10-i386-2
gtk+-1.2.10-i386-3
openssl-0.9.7g-i486-2
x11-6.8.2-i486-4
-
NVidia-1.0.7676-ix86-1dow

The NVidia pack for Linux.

Provides 2D and OpenGL hardware management. The content is proprietary software form NVidia (see LICENSE in the doc directory).

This package provides a *tainted* module compiled with kernel 2.4.29 sources, OpenGL lib for X11 and X11 needed modules. A sample of xorg.conf is given in the doc directory

Packaged by Mounir AITTAHAR <downwater@free.fr>.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
xkb-tifinagh-6.8.1-ix86-1dow
dosbox-0.63-i486-1mik
gliv-1.9.3-i486-1dow
glut-3.7-i486-1
libtiff-3.7.3-i486-1
mplayer-1.0pre7try2-i686-1dow
Wine-20041019-i486-S10nodebug
x11-6.8.2-i486-4
xawtv-3.95-i686-1dow
xlockmore-5.18-i486-1
xmms-1.2.10-i486-3
zsnes-1.36-i486-1cy
openssh-4.2p1-i486-1

openssh (Secure Shell daemon and clients)

ssh (Secure Shell) is a program for logging into a remote machine and for executing commands on a remote machine. It is intended to replace rlogin and rsh, and provide secure encrypted communications between two untrusted hosts over an insecure network. sshd (SSH Daemon) is the daemon program for ssh. OpenSSH is based on the last free version of Tatu Ylonen's SSH, further enhanced and cleaned up by Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt, and Dug Song. It has a homepage at http://www.openssh.com/

aaa_elflibs-10.2.0-i486-3
openssl-0.9.7g-i486-2
-
openssl-0.9.7g-i486-2

openssl (Secure Sockets Layer toolkit)

The OpenSSL certificate management tool and the shared libraries that provide various encryption and decryption algorithms and protocols.

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org). This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com).

- aaa_elflibs-10.2.0-i486-3
apache2-2.0.52-i486-1spi
bind-9.3.1-i486-1
cups-1.1.23-i486-1
espgs-8.15rc4-i486-1
gftp-2.0.18-i486-1
gimp-print-4.2.7-i486-1
gimp-print-4.2.7-i486-1
gnome-vfs-2.6.1.1-i486-3ccg
gnumeric-1.4.0-i486-1rsa
hplip-0.9.2-i486-1kjz
libbonoboui-2.6.1-i486-1
libgnome-2.6.1.1-i486-2
libgnomeprint-2.6.1-i486-1
libgnomeui-2.6.1.1-i486-1
lynx-2.8.5rel.5-i486-1
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
net-snmp-5.1.1-i486-1rob
nmap-3.93-i486-1
openssh-4.2p1-i486-1
perl-5.8.7-i486-1
php-apache2-5.0.3-i486-1spi
proftpd-1.2.10-i486-4
python-2.4.1-i486-1
samba-3.0.20b-i486-1
tcpdump-3.9.3-i486-1
wget-1.10.2-i486-1
xchat-2.4.5-i486-1
orbit2-2.10.2-i486-1
Doesn't exist in Slackware 10.2

orbit2

ORBit is a high-performance CORBA (Common Object Request Broker Architecture) ORB (object request broker). It allows programs to send requests and receive replies from other programs, regardless of the locations of the two programs. CORBA is an architecture that enables communication between program objects, regardless of the programming language they're written in or the operating system they run on.

aaa_elflibs-10.2.0-i486-3
glib2-2.8.3-i686-1dow
libidl-0.8.5-i486-1
gconf-2.6.2-i486-1
gnome-vfs-2.6.1.1-i486-3ccg
gnumeric-1.4.0-i486-1rsa
libbonobo-2.8.0-i486-2jim
libbonoboui-2.6.1-i486-1
libgnome-2.6.1.1-i486-2
libgnomeui-2.6.1.1-i486-1
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
pango-1.8.2-i486-1

pango

Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed; however, most of the work on Pango was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.

aaa_elflibs-10.2.0-i486-3
glib2-2.8.3-i686-1dow
x11-6.8.2-i486-4
abiword-2.4-i686-1dow
aMule-2.0.3-i686-1thee
dia-0.94-i486-1ota
gconf-2.6.2-i486-1
gftp-2.0.18-i486-1
gimp-2.2.8-i486-1
gliv-1.9.3-i486-1dow
gnome-keyring-0.2.1-i486-1
gnumeric-1.4.0-i486-1rsa
gtk+2-2.6.10-i486-1
gtkmm-2.6.5-i686-1dow
gucharmap-1.4.1-i486-2
inkscape-0.42.2-i486-2arf
libbonoboui-2.6.1-i486-1
libglade-2.4.2-i486-1
libgnomecanvas-2.6.1.1-i486-1
libgnomeprint-2.6.1-i486-1
libgnomeprintui-2.6.1-i486-1
libgnomeui-2.6.1.1-i486-1
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mplayerplug-in-2.75-i486-1tsu
NVidia-1.0.7676-ix86-1dow
sane-1.0.16-i486-1
sodipodi-0.34-i486-2gen
synfig_studio-0.61.01-i486-1dow
wxGTK2-2.6.1-i686-1thee
xchat-2.4.5-i486-1
xsane-0.97-i486-1
pciutils-2.1.11-i486-6

pciutils (PCI utilities)

lspci displays detailed information about all PCI buses and devices in the system, replacing the original /proc/pci interface.

setpci allows reading from and writing to PCI device configuration registers. For example, you can adjust the latency timers with it.

pcimodules lists the kernel modules for all plugged in PCI devices.

See the manual pages for more details.

- -
perl-5.8.7-i486-1

perl (Practical Extraction and Report Language)

Larry Wall's "Practical Extraction and Report Language". Perl is a language optimized for scanning arbitrary text files, extracting information from those text files, and printing reports based on that information. It's also a good language for many system management tasks. The language is intended to be practical (easy to use, efficient, complete) rather than beautiful (tiny, elegant, minimal).

aaa_elflibs-10.2.0-i486-3
openssl-0.9.7g-i486-2
-
php-apache2-5.0.3-i486-1spi

php (HTML-embedded scripting language)

PHP is an HTML-embedded scripting language. It shares syntax characteristics with C, Java, and Perl. The primary objective behind this language is to make a fast and easy-to-use scripting language for dynamic web sites.

More information can be found online at http://www.php.net/

Warning: To be used only with the apache2 package. Package Created By: Bren <spike@spykes.net>

aaa_elflibs-10.2.0-i486-3
aspell-0.60.2-i486-1
cxxlibs-5.0.7-i486-1
libidn-0.5.17-i486-1
libxml2-2.6.22-i486-1
libxslt-1.1.15-i486-1
mhash-0.9.2-i486-1
openssl-0.9.7g-i486-2
t1lib-5.1.0-i486-1
-
pkgconfig-0.15.0-i486-1

pkgconfig

pkg-config is a system for managing library compile/link flags that works with automake and autoconf. It replaces the ubiquitous *-config scripts you may have seen with a single tool. See the man page that comes with pkg-config for full documentation.

- -
pkgtools-10.2.0-i486-5

pkgtools (The Slackware package maintenance system)

This package contains utilities for handling Slackware packages. Included are the command line utilities 'installpkg', 'removepkg', 'makepkg', 'explodepkg', and 'upgradepkg' that install, remove, build, examine, and upgrade software packages. Also included are 'pkgtool', a menu based program for installing packages, removing packages, or viewing the packages that are installed on the system, documentation (man pages), and a few other system admin scripts.

aaa_elflibs-10.2.0-i486-3
-
popt-1.7-i386-1

popt (command line parsing library)

Popt is a C library for parsing command line parameters. Popt was heavily influenced by the getopt() and getopt_long() functions, but it improves on them by allowing more powerful argument expansion. Popt can parse arbitrary argv[] style arrays and automatically set variables based on command line arguments. Popt allows command line arguments to be aliased via configuration files and includes utility functions for parsing arbitrary strings into argv[] arrays using shell-like rules.

- -
procps-3.2.5-i486-1

procps (utilities for displaying process information)

The procps package provides the classic set of utilities used to display information about the processes currently running on the machine.

aaa_elflibs-10.2.0-i486-3
-
proftpd-1.2.10-i486-4

proftpd (FTP server daemon)

ProFTPD is the Professional File Transfer Protocol (FTP) server daemon. ProFTPD grew out of the desire to have a secure and configurable FTP server, and out of a significant admiration of the Apache web server.

aaa_elflibs-10.2.0-i486-3
openssl-0.9.7g-i486-2
-
python-2.4.1-i486-1

python (object-oriented interpreted programming language)

Python is an interpreted, interactive, object-oriented programming language that combines remarkable power with very clear syntax. Python's basic power can be extended with your own modules written in C or C++. Python is also adaptable as an extension language for existing applications.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
openssl-0.9.7g-i486-2
tcl-8.4.11-i486-1
tk-8.4.11-i486-1
x11-6.8.2-i486-4
-
raidtools-1.00.3-i386-1

raidtools (software RAID tools)

The raidtools package includes the system utilities you need to set up and maintain a software RAID device (using two or more disk drives in combination for fault tolerance and improved performance) on a Linux system.

- -
rar-3.4-i386-1ac0

rar 3.4 (archiving utility)

The RAR is another archiving utility from wide area of archiving and backup utilities.

Home page: http://www.rarlab.com

Package created by 1ac0 <email (at) 1ac0 (dot) net>.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
-
rpm-4.2.1-i486-3

rpm

RPM is a tool from Red Hat Software used to install and remove packages in the .rpm format. When installing RPM packages on Slackware, you may need to use the --nodeps and --force options. Before installing any binary package, it's wise to examine it to see what it's going to do, and if it will overwrite any files. You can use rpm2tgz to convert .rpm packages to .tgz packages so you can look them over.

aaa_elflibs-10.2.0-i486-3
-
rsync-2.6.6-i486-1

rsync

rsync is a replacement for rcp that has many more features. It uses the "rsync algorithm" which provides a very fast method for bringing remote files into sync. It does this by sending just the differences in the files across the link, without requiring that both sets of files are present at one of the ends of the link beforehand.

rsync was written by Andrew Tridgell and Paul Mackerras.

aaa_elflibs-10.2.0-i486-3
-
sagcad-0.9.6-i486-1dow

No description available. Sorry :-(

glib-1.2.10-i386-2
gtk+-1.2.10-i386-3
x11-6.8.2-i486-4
-
samba-3.0.20b-i486-1

samba (SMB file and print server)

Samba is an SMB file and print server for SMB and CIFS clients. It allows you to make file space or printers on a Samba host available to any PCs running SMB clients (such as PCs running Windows).

If you have any SMB servers (such as Windows NT/2K Server), you may be able to replace them by or supplement them with Samba. One of Samba's big strengths is integration, so you can use it to tie together your Linux hosts and Windows PC clients.

aaa_elflibs-10.2.0-i486-3
openssl-0.9.7g-i486-2
gnome-vfs-2.6.1.1-i486-3ccg
sane-1.0.16-i486-1

sane (Scanner Access Now Easy)

SANE is a universal scanner interface that provides standardized access to any raster image scanner hardware, such as flatbed scanners, hand-held scanners, video and still cameras, frame-grabbers, and other similar devices.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
gimp-2.2.8-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
libieee1284-0.2.10-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
Wine-20041019-i486-S10nodebug
xsane-0.97-i486-1
screen-4.0.2-i486-1

screen (screen manager with VT100/ANSI terminal emulation)

Screen is a full-screen window manager that multiplexes a physical terminal between several processes (typically interactive shells). Each virtual terminal provides the functions of a DEC VT100 terminal and several control functions from the ISO 6492 (ECMA 48, ANSI X3.64) and ISO 2022 standards (e.g. insert/delete line and support for multiple character sets). There is a scrollback history buffer for each virtual terminal and a copy-and-paste mechanism that allows moving text regions between windows.

aaa_elflibs-10.2.0-i486-3
utempter-1.1.3-i486-1
-
scummvm-0.8.0_slack-i486-1
Doesn't exist in Slackware 10.2

ScummVM 0.8.0

ScummVM is a collection of interpreters, capable of emulating several adventure game engines. ScummVM mainly supports engines created using SCUMM (Script Creation Utility for Maniac Mansion), used in various LucasArts games such as Monkey Island, Day of the Tentacle, and others. ScummVM also contains interpreters for several non-SCUMM games, currently these are Beneath a Steel Sky, Broken Sword I & II and Simon the Sorcerer 1 & 2.

ScummVM requires that SDL is installed.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
sdl-1.2.9-i486-1
x11-6.8.2-i486-4
-
sdl-1.2.9-i486-1

sdl (Simple DirectMedia Layer library)

This is the Simple DirectMedia Layer, a generic API that provides low level access to audio, keyboard, mouse, joystick, 3D hardware via OpenGL, and 2D framebuffer across multiple platforms.

SDL links against alsa-lib, arts, audiofile, esound, and the X11 libraries. Make sure all of these are installed if you're planning to use SDL (a full installation will cover all of the prerequisites).

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
libmikmod-3.1.11a-i486-1syn
libogg-1.1.2-i486-1
libvorbis-1.1.1-i486-1
x11-6.8.2-i486-4
dosbox-0.63-i486-1mik
mplayer-1.0pre7try2-i686-1dow
scummvm-0.8.0_slack-i486-1
SDL_mixer-1.2.5-i686-3jto
SDL_ttf-2.0.7-i686-1jlp
spcaview-20051001-i486-0.ogm
zsnes-1.36-i486-1cy
SDL_mixer-1.2.5-i686-3jto

SDL_mixer 1.2.5

Due to popular demand, here is a simple multi-channel audio mixer. It supports 8 channels of 16 bit stereo audio, plus a single channel of music, mixed by the popular MikMod MOD, Timidity MIDI and SMPEG MP3 libraries.

Homepage: http://www.libsdl.org/projects/SDL_mixer/

Packager: Jay Scott Raymond <jay_scott_raymond@charter.net>

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
libogg-1.1.2-i486-1
libvorbis-1.1.1-i486-1
sdl-1.2.9-i486-1
x11-6.8.2-i486-4
-
SDL_ttf-2.0.7-i686-1jlp

SDL_ttf 2.0.7

Simple DirectMedia Layer - Sample TrueType Font Library This library allows you to use TrueType fonts to render text in SDL applications.

Homepage: http://www.libsdl.org/

Packager: Jay Scott Raymond <jay_scott_raymond@charter.net>

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
sdl-1.2.9-i486-1
x11-6.8.2-i486-4
-
sed-4.0.9-i486-2

sed (stream editor)

This is the GNU version of sed, a stream editor. A stream editor is used to perform basic text transformations on an input stream (a file or input from a pipeline). It is sed's ability to filter text in a pipeline which distinguishes it from other types of editors.

sed is a required package (it is needed by many system scripts).

- -
seejpeg-1.10-i386-1

seejpeg (console JPEG viewer)

Seejpeg is an image viewer which uses SVGAlib. In spite of the name, it understands the JPEG, GIF, PPM, BMP and TARGA formats. One nice feature of seejpeg is that it automatically decides on the best video mode to use based on the image being displayed and the video card being used.

Evan Harris is the author of seejpeg.

aaa_elflibs-10.2.0-i486-3
-
shadow-4.0.3-i486-11

shadow (shadow password suite)

This set of login related programs utilizes an alternate, non-readable file to contain the actual encrypted passwords. This is presumed to increase system security by increasing the difficulty with which system crackers obtain encrypted passwords. It was written by Julianne Frances Haugh and the Linux port is maintained by Tomasz Kloczko.

This package provides 'login', which is needed to log into the system.

- -
slang-1.4.9-i486-1

slang

S-Lang is an interpreted language that was designed from the start to be easily embedded into a program to provide it with a powerful extension language. S-Lang is also a programmer's library that permits a programmer to develop sophisticated platform-independent software. In addition to providing the S-Lang extension language, the library provides facilities for screen management, keymaps, and low-level terminal I/O.

- -
slocate-2.7-i486-3

slocate (Secure Locate)

Slocate is an enhanced version of locate, a command to help you locate files on the system. Like the original version of locate, Slocate maintains a database of files on the system, updating it nightly. Unlike the original, Slocate indexes every file on the machine rather than only the ones that can be seen by everyone. The "secure" part of slocate is that it will only return matches if the user is allowed to see the files.

- -
sodipodi-0.34-i486-2gen

sodipodi 0.34

Sodipodi is a vector-based drawing program, like CorelDraw® or Adobe Illustrator® from the proprietary software world, and Sketch or Karbon14 from the free software world. It is free software, distributed under the terms of the Gnu General Public License, Version 2.

packager: otaku@fastwebnet.it

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
libart_lgpl-2.3.17-i486-1
libgnomecanvas-2.6.1.1-i486-1
libgnomeprint-2.6.1-i486-1
libgnomeprintui-2.6.1-i486-1
libxml2-2.6.22-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
-
sox-12.17.8-i486-1

sox (universal sound sample translator)

Sox is a universal sound converter, player, and recorder. It can play, record, and convert between several sound file formats such as .au, .snd, .voc and .wav.

libmad-0.15.1b-i486-1
libogg-1.1.2-i486-1
libvorbis-1.1.1-i486-1
-
speex-1.1.6-i486-1rob

speex (open-source, patent-free speech codec)

Speex is a patent-free audio codec designed especially for voice (unlike Vorbis which targets general audio) signals and providing good narrowband and wideband quality. This project aims to be complementary to the Vorbis codec.

Packaged by: Robert Stan

libogg-1.1.2-i486-1
-
strace-4.5.4-i486-1

strace (trace system calls and signals)

Strace allows you to trace the execution of a command. It runs the specified command until it exits, intercepting signals and system calls and dumping the information to the standard error. System administrators, diagnosticians and trouble-shooters will find it invaluable for solving problems with programs for which the source is not readily available since they do not need to be recompiled in order to trace them.

- -
sudo-1.6.8p9-i486-1

sudo (give limited root privileges to certain users)

'sudo' is a command that allows users to execute some commands as root. The /etc/sudoers file (edited with 'visudo') specifies which users have access to sudo and which commands they can run. 'sudo' logs all its activities to /var/log/ so the system administrator can keep an eye on things.

- -
svgalib-1.4.3-i386-2

svgalib (Super-VGA Graphics Library)

A video hardware graphics library, based on VGAlib 1.2. Supports most video graphics adaptors, at least in VGA modes. Contains additional support for higher resolution modes with cards based on ALI2301, ARK Logic ARK1000PV/2000PV, ATI SVGA, ATI Mach32, ATI Mach64, Chips and Technologies, Cirrus Logic GD542x/3x, Genoa GVGA6400, Hercules Stingray 64/Video, Oak Technologies OTI-037/67/77/87, S3, Trident TVGA 8900C/9000/9440, Tseng ET4000/ET4000W32, and some other chipsets.

aaa_elflibs-10.2.0-i486-3
-
swaret-1.6.3-noarch-2
Doesn't exist in Slackware 10.2

swaret (SlackWARE Tool)

swaret Upgrades, Installs, Re-Installs, and Downloads Packages, Patches, Sources (with Build Scripts) and much more! Includes Dependency Support, which tracks and fixes missing Libraries for all packages. Uses Slackware Linux Mirrors through http/ftp/rsync or local filesystem, or 3rd-party Slackware Packages availible on LinuxPackages DOT NET or other Repository Sites. Also, support for Internationalization (i18n). See http://swaret.sourceforge.net Created by Luc Cottyn Maintained by Michael G. Manry

- -
synfig_core-0.61.01-i486-1dow

Synfig is a powerful, industrial-strength vector-based 2D animation software package, designed from the ground-up for producing feature-film quality animation with fewer people and resources. While there are many other programs currently on the market to aid with the efficient production of 2D animation, we are currently unaware of any other software that can do what our software can.

Contains the core libraries and a command line rendering utility called Synfig Tool.

See also official Website: http://www.synfig.com/

Packaged by Mounir AITTAHAR <downwater@free.fr>

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
glib2-2.8.3-i686-1dow
glibmm-2.8.1-i686-1dow
libsigc++-2.0.16-i686-1dow
libxml++-2.12.0-i486-1dow
libxml2-2.6.22-i486-1
x11-6.8.2-i486-4
synfig_studio-0.61.01-i486-1dow
synfig_studio-0.61.01-i486-1dow

Synfig is a powerful, industrial-strength vector-based 2D animation software package, designed from the ground-up for producing feature-film quality animation with fewer people and resources. While there are many other programs currently on the market to aid with the efficient production of 2D animation, we are currently unaware of any other software that can do what our software can.

This package contents the GUI front-end of Synfig.

See also official Website: http://www.synfig.com/

Packaged by Mounir AITTAHAR <downwater@free.fr>

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
cxxlibs-5.0.7-i486-1
glib2-2.8.3-i686-1dow
glibmm-2.8.1-i686-1dow
gtk+2-2.6.10-i486-1
gtkmm-2.6.5-i686-1dow
libsigc++-2.0.16-i686-1dow
libxml++-2.12.0-i486-1dow
libxml2-2.6.22-i486-1
pango-1.8.2-i486-1
synfig_core-0.61.01-i486-1dow
x11-6.8.2-i486-4
-
sysklogd-1.4.1-i486-9

sysklogd (Linux system logging utilities)

Dr. Greg Wettstein and Stephen Tweedie's syslogd/klogd.

This package contains a modified version of syslogd for the Linux environment. An additional utility, klogd, is included which allows kernel logging to be directed through the syslogd facility. Syslogd and klogd are started when your system boots.

- -
sysvinit-2.84-i486-56

sysvinit (init, the parent of all processes)

System V style init programs by Miquel van Smoorenburg that control the booting and shutdown of your system. These support a number of system runlevels, each with a specific set of utilities spawned. For example, the normal system runlevel is 3, which starts agetty on virtual consoles tty1 - tty6. Runlevel 4 starts xdm. Runlevel 0 shuts the system down.

- -
t1lib-5.1.0-i486-1

t1lib (Type 1 font rasterizer library)

t1lib is a library distributed under the GNU General Public Library License for generating character and string glyphs from Adobe Type 1 fonts under UNIX. t1lib uses most of the code of the X11 rasterizer donated by IBM to the X11 project.

x11-6.8.2-i486-4
php-apache2-5.0.3-i486-1spi
taglib-1.4-i486-1

taglib (audio meta-data library)

TagLib is a library for reading and editing the meta-data of several popular audio formats. Currently it supports both ID3v1 and ID3v2 for MP3 files, Ogg Vorbis comments and ID3 tags and Vorbis comments in FLAC files.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
-
tar-1.15.1-i486-1

tar (archiving utility)

This is the GNU version of tar, an archiving program designed to store and extract files from an archive file known as a tarfile. A tarfile may be made on a tape drive, however, it is also common to write a tarfile to a normal file.

Slackware's package system uses tarfiles compressed with GNU gzip.

- -
tcl-8.4.11-i486-1

tcl (Tool Command Language)

Tcl, developed by Dr. John Ousterhout, is a simple to use text-based script language with many built-in features which make it especially nice for writing interactive scripts.

- python-2.4.1-i486-1
tk-8.4.11-i486-1
xchat-2.4.5-i486-1
tcpdump-3.9.3-i486-1

tcpdump

Tcpdump is a tool for network monitoring and data acquisition. You can use it to dump information on all the packets on a network that match a boolean expression. Tcpdump uses libpcap, a system independent interface for user-level packet capture.

openssl-0.9.7g-i486-2
-
tcpip-0.17-i486-35

tcpip (TCP/IP networking programs and support files)

This is a set of standard TCP/IP utilities for Linux. Some of these were written from scratch and some were ported from various sources such as BSD. Some of the people who helped write and/or port this code include: H. Peter Anvin, Donald J. Becker, Alan Cox, David A. Holland, Fred N. van Kempen, Olaf Kirch, H.J. Lu, David Miller, Florian La Roche, Mark Shand, Rick Sladkey, Johannes Stille, Linus Torvalds, Wietse Venema, and Orest Zborowski.

aaa_elflibs-10.2.0-i486-3
-
tetex-3.0-i486-1

tetex (teTeX binaries and support files)

This package contains the binaries and support files required for the teTeX TeX distribution, such as input files for TeX, runtime configuration files, hyphenation tables, manpages, and the computer modern fonts.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
lesstif-0.94.4-i486-1
x11-6.8.2-i486-4
-
tk-8.4.11-i486-1

tk (Tk toolkit for Tcl)

Tk is an extension to Tcl that allows you to quickly and easily build X11 applications that have the look and feel of Motif apps.

tcl-8.4.11-i486-1
x11-6.8.2-i486-4
python-2.4.1-i486-1
traceroute-1.4a12-i386-2

traceroute (IP packet route tracing utility)

The traceroute utility displays the route used by IP packets on their way to a specified network host. Traceroute will display the IP number and host name (if possible) of all the machines along the route taken by the packets. If you're having network connectivity problems, traceroute can show you where the trouble is located.

- -
umsdos-progs-1.13-i386-1

umsdos-progs

Various utilities needed for the UMSDOS filesystem.

These programs were originally written by Jacques Gelinas, and are currently maintained by Matija Nalis.

- -
unrar-3.4.3-i486-1arf

unrar-3.4.3 (RAR Archiver Utility)

The UnRAR utility is a freeware program for extracting, testing and viewing the contents of archives created with the RAR archiver.

Package Created by Fred Broders

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
-
usbutils-0.11-i486-3

usbutils (USB utilities)

lsusb displays detailed information about all USB buses and devices in the system.

usbmodules lists the kernel modules for a plugged in USB device.

See the manual pages for more details.

aaa_elflibs-10.2.0-i486-3
-
utempter-1.1.3-i486-1

utempter (utmp updating library and utility)

The utempter package provides a utility and shared library that allows terminal applications such as xterm and screen to update /var/run/utmp and /var/log/wtmp without requiring root privileges.

- screen-4.0.2-i486-1
x11-6.8.2-i486-4
util-linux-2.12p-i486-2

util-linux (a huge collection of essential utilities)

adjtimex agetty arch blockdev cal cfdisk chkdupexe clear clock col colcrt colrm column ctrlaltdel cytune ddate dmesg dnsdomainname domainname elvtune fdformat fdisk fsck.cramfs fsck.minix getopt getoptprog hexdump hostname hwclock ipcrm ipcs isosize jaztool line logger look losetup mcookie mesg mkfs mkfs.bfs mkfs.cramfs mkfs.minix mkswap more mount namei nisdomainname pg pivot_root ramsize raw rdev readprofile rename renice reset rev rootflags script setfdprm setserial setsid setterm sfdisk sln strings swapoff swapon tput tunelp ul umount update vidmode wall whereis write ypdomainname ziptool

aaa_elflibs-10.2.0-i486-3
e2fsprogs-1.38-i486-2
-
wget-1.10.2-i486-1

wget (a non-interactive network retriever)

GNU Wget is a free network utility to retrieve files from the World Wide Web using HTTP and FTP, the two most widely used Internet protocols. It works non-interactively, thus enabling work in the background after having logged off.

The author of Wget is Hrvoje Niksic <hniksic@srce.hr>.

openssl-0.9.7g-i486-2
-
whois-4.6.16-i486-1

whois (whois directory client)

This is an enhanced whois (RFC 954) client derived from the BSD and RIPE whois programs. It can automatically select the appropriate whois server for most queries.

This version of whois was written by Marco d'Itri For more information, see: http://www.linux.it/~md/software/

- -
windowmaker-0.92.0-i486-1

windowmaker (a fast and elegant window manager)

Window Maker is a window manager for the X Window System that is relatively fast and small, feature rich, easy to use, with a simple and elegant appearance reminiscent of the NeXTSTEP(tm) graphical user interface.

Window Maker is part of the official GNU project.

aaa_elflibs-10.2.0-i486-3
libungif-4.1.3-i486-1
x11-6.8.2-i486-4
-
Wine-20041019-i486-S10nodebug

Wine (Client, server, and winelib)

Wine Is Not an Emulator, it is an alternative implementation of the Windows 3.x and Win32 APIs. Wine provides both a development toolkit (Winelib) for porting legacy Windows sources to Unix and a program loader, allowing unmodified Windows 3.1/95/NT binaries to run under Intel Unixes. Please, PLEASE read the README or else Wine probably won't work for you.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
glut-3.7-i486-1
libieee1284-0.2.10-i486-1
NVidia-1.0.7676-ix86-1dow
sane-1.0.16-i486-1
x11-6.8.2-i486-4
-
wireless-tools-27-i486-2

wireless-tools (utilities for wireless networking)

This package contains tools used for configuring wireless networking interfaces.

iwconfig; manipulate the basic wireless parameters iwlist; to list addresses, frequencies, and bit-rates iwspy; query the per node link quality iwpriv; set the private parameters of a wireless network interface

The wireless-tools were written by Jean Tourrilhes.

- -
wmclockmon-0.8.0-i386-2bzh

wmclockmon 0.8.0 by Thomas Nemeth (tnemeth@free.fr)

wmclockmon is a dockapp which shows a nice digital clock with 7 different styles either in LCD style and LED style, using locales to display week-day and month names. It also features the internet time...

Package created for Slackware by niouls (niouls@gmx.net)

See http://tnemeth.free.fr/projets/dockapps.html

glib-1.2.10-i386-2
gtk+-1.2.10-i386-3
x11-6.8.2-i486-4
-
wmnetload-1.3-i386-1bzh

wmnetload 1.3 by meem (meem@gnu.org)

wmnetload is a network interface monitor dockapp for Window Maker. It is designed to fit well with dockapps like wmcpuload and wmmemmon. libdockapp 0.4.0 is required to make it work.

Package created for Slackware by niouls (niouls@gmx.net)

See http://freshmeat.net/projects/wmnetload/

libdockapp-0.4.0-i386-1bzh
x11-6.8.2-i486-4
-
wmxkb-1.2.2-i686-dow3

WmXKb - A dockable/swallowed XKB groups indicator and switch.

Wmxkb showns and controls XKB groups (XFree86 key maps). It can be used as a dockable/swallowed applet with Window Maker, BlackBox and clones (fluxbox, pwm, etc), or any window manager that supports swallowing, including afterstep, gnome-1, kwm-1, fvwm and clones. Alternatively, you can run wmxkb as a normal window with any window manager.

Packaged by Mounir AITTAHAR <downwater@free.fr>

x11-6.8.2-i486-4
-
wv-1.0.3-i486-1kjz

wv (MS Word document import library)

wv is a library which allows access to Microsoft Word files. It can load and parse Word 2000, 97, 95 and 6 file formats. (These are the file formats known internally as Word 9, 8, 7 and 6.) There is some support for reading earlier formats as well: Word 2 docs are converted to plaintext.

Packaged by Ken Zalewski (kennyz@nycap.rr.com)

aaa_elflibs-10.2.0-i486-3
glib2-2.8.3-i686-1dow
-
wxGTK2-2.6.1-i686-1thee

wxGTK2 (wxWidgets)

wxWidgets (formerly wxWindows) gives you a single, easy-to-use API for writing GUI applications on multiple platforms. Link with the appropriate library for your platform (Windows/Unix/Mac, others coming shortly) and compiler (almost any popular C++ compiler), and your application will adopt the look and feel appropriate to that platform.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
cxxlibs-5.0.7-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
pango-1.8.2-i486-1
x11-6.8.2-i486-4
aMule-2.0.3-i686-1thee
x11-6.8.2-i486-4

x11 (X11 base package)

This is the base package for X11, and provides the required binaries, shared libraries, and support files (except fonts) to run X on Linux.

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
NVidia-1.0.7676-ix86-1dow
utempter-1.1.3-i486-1
aalib-1.4rc5-i386-1
abiword-2.4-i686-1dow
amsn-0.95-i486-1dow
aMule-2.0.3-i686-1thee
dia-0.94-i486-1ota
dosbox-0.63-i486-1mik
emacs-21.4a-i486-2
espgs-8.15rc4-i486-1
floppy-5.4-i386-3
gconf-2.6.2-i486-1
gftp-2.0.18-i486-1
gimp-2.2.8-i486-1
gliv-1.9.3-i486-1dow
glut-3.7-i486-1
gnome-keyring-0.2.1-i486-1
gnumeric-1.4.0-i486-1rsa
groff-1.19.1-i486-3
gtk+-1.2.10-i386-3
gtk+2-2.6.10-i486-1
gtkglext-1.0.6-i486-1dow
gtkmm-2.6.5-i686-1dow
gucharmap-1.4.1-i486-2
gv-3.6.0-i386-1pvm
imagemagick-6.2.3_3-i486-1
inkscape-0.42.2-i486-2arf
j2sdk-1_4_2_04-i586-3
lesstif-0.94.4-i486-1
libbonoboui-2.6.1-i486-1
libdockapp-0.4.0-i386-1bzh
libglade-2.4.2-i486-1
libgnomecanvas-2.6.1.1-i486-1
libgnomeprint-2.6.1-i486-1
libgnomeprintui-2.6.1-i486-1
libgnomeui-2.6.1.1-i486-1
libtiff-3.7.3-i486-1
mozilla-firefox-1.0.7-i686-1
mozilla-firefox-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mozilla-thunderbird-1.0.7-i686-1
mp3info-0.8.4-i486-1sam
mplayer-1.0pre7try2-i686-1dow
mplayerplug-in-2.75-i486-1tsu
nmap-3.93-i486-1
NVidia-1.0.7676-ix86-1dow
pango-1.8.2-i486-1
python-2.4.1-i486-1
sagcad-0.9.6-i486-1dow
sane-1.0.16-i486-1
scummvm-0.8.0_slack-i486-1
sdl-1.2.9-i486-1
SDL_mixer-1.2.5-i686-3jto
SDL_ttf-2.0.7-i686-1jlp
sodipodi-0.34-i486-2gen
spcaview-20051001-i486-0.ogm
synfig_core-0.61.01-i486-1dow
synfig_studio-0.61.01-i486-1dow
t1lib-5.1.0-i486-1
tetex-3.0-i486-1
tk-8.4.11-i486-1
windowmaker-0.92.0-i486-1
Wine-20041019-i486-S10nodebug
wmclockmon-0.8.0-i386-2bzh
wmnetload-1.3-i386-1bzh
wmxkb-1.2.2-i686-dow3
wxGTK2-2.6.1-i686-1thee
xaw3d-1.5-i386-3
xawtv-3.95-i686-1dow
xchat-2.4.5-i486-1
xlockmore-5.18-i486-1
xmms-1.2.10-i486-3
xmms-crossfade-0.3.6-i686-1
xmms-wma-1.0.3-i486-1cy
xsane-0.97-i486-1
xv-3.10a-i486-4
zsnes-1.36-i486-1cy
x11-devel-6.8.1-i486-2jim

x11-devel (Libraries and other files for X programming)

This is a set of include files (found in /usr/X11R6/include), static libraries (found in /usr/X11R6/lib/*.a) and configuration files (found in /usr/X11R6/lib/X11/config/) needed to compile X programs.

- -
x11-fonts-100dpi-6.8.1-noarch-2jim

x11-fonts-100dpi (100dpi screen fonts for the X Window System)

These extra fonts are useful on high-resolution monitors.

- -
x11-fonts-cyrillic-6.8.1-noarch-2jim

x11-fonts-cyrillic (Cyrillic fonts for the X Window System)

A set of Cyrillic fonts for X.

- -
x11-fonts-misc-6.8.1-noarch-2jim

x11-fonts-misc (fonts for the X Window System)

This is a minimal set of fonts needed to run X.

- -
x11-fonts-scale-6.8.1-noarch-2jim

x11-fonts-scale (scalable screen fonts for the X Window System)

Speedo, Type 1, and TrueType scalable fonts for X.

- -
xaw3d-1.5-i386-3

xaw3d (3D version of libXaw)

Xaw3d is a set of 3D widgets by Kaleb S. Keithley based on the Athena Widget set. The Three-D Athena may be used as a replacement for the Athena (Xaw) Widget set -- you may relink almost any Athena Widget based application and obtain a three dimensional appearance on some of the widgets. You can also replace your shared libXaw with libXaw3d and obtain the three dimensional appearance without even relinking.

x11-6.8.2-i486-4
emacs-21.4a-i486-2
gv-3.6.0-i386-1pvm
xawtv-3.95-i686-1dow

Xawtv-3.95

Xawtv started as TV application for the bttv driver, because the Motif-based "xtvscreen" was the only TV application at this time. Alot has changed since. The bttv driver switched over to the new video4linux interface. xawtv isn't a single application any more, it is a small suite of video4linux related software

Packaged by Downwater <downwater@free.fr>

aaa_elflibs-10.2.0-i486-3
aalib-1.4rc5-i386-1
lesstif-0.94.4-i486-1
NVidia-1.0.7676-ix86-1dow
x11-6.8.2-i486-4
-
xchat-2.4.5-i486-1

xchat

X-Chat is a GTK+-based IRC (Internet Relay Chat) client.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
openssl-0.9.7g-i486-2
pango-1.8.2-i486-1
tcl-8.4.11-i486-1
x11-6.8.2-i486-4
-
xkb-tifinagh-6.8.1-ix86-1dow

No description available. Sorry :-(

- gtkglext-1.0.6-i486-1dow
iptables-1.3.3-i486-1
NVidia-1.0.7676-ix86-1dow
xlockmore-5.18-i486-1

xlockmore (screen locker for X)

Patrick J. Naughton's xlock screensaver/locker for X, with many more modes added by David A. Bagley.

The 'Bob' bitmap has been included especially for Slackware, as well as a Linux penguin logo. (NOTE: the image of J. R. "Bob" Dobbs is a registered trademark of The Subgenius Foundation, used by permission)

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
NVidia-1.0.7676-ix86-1dow
x11-6.8.2-i486-4
-
xmms-1.2.10-i486-3

xmms (X Multimedia System)

XMMS is the X Multimedia System. It is used to play audio and other kinds of media files. By default XMMS can play MPEG audio, Ogg Vorbis, RIFF wav, most module formats, and a few other formats. XMMS can be extended through plugins to play a number of other audio and video formats.

aaa_elflibs-10.2.0-i486-3
audiofile-0.2.6-i486-1
esound-0.2.36-i486-1
glib-1.2.10-i386-2
glib2-2.8.3-i686-1dow
gtk+-1.2.10-i386-3
libmikmod-3.1.11a-i486-1syn
libogg-1.1.2-i486-1
libvorbis-1.1.1-i486-1
NVidia-1.0.7676-ix86-1dow
x11-6.8.2-i486-4
xmms-crossfade-0.3.6-i686-1
xmms-wma-1.0.3-i486-1cy
xmms-crossfade-0.3.6-i686-1
Doesn't exist in Slackware 10.2

xmms-crossfade

This XMMS plugin provides crossfading, continuous output and gap-killing between tracks.

glib-1.2.10-i386-2
gtk+-1.2.10-i386-3
x11-6.8.2-i486-4
xmms-1.2.10-i486-3
-
xmms-wma-1.0.3-i486-1cy

xmms-wma 1.0.3

Plug-in for WMA V1/V2 support in XMMS.

Package Created By: Cast-Away

glib-1.2.10-i386-2
gtk+-1.2.10-i386-3
x11-6.8.2-i486-4
xmms-1.2.10-i486-3
-
xsane-0.97-i486-1

xsane (Graphical frontend to SANE, Scanner Access Now Easy)

xsane provides a graphical user-interface to control an image acquisition device such as a flatbed scanner. It allows previewing and scanning individual images and can be invoked either directly from the command-line or through the GIMP image manipulation program.

xsane accesses image acquisition devices through the SANE (Scanner Access Now Easy) interface.

aaa_elflibs-10.2.0-i486-3
atk-1.9.1-i486-1
gimp-2.2.8-i486-1
glib2-2.8.3-i686-1dow
gtk+2-2.6.10-i486-1
libieee1284-0.2.10-i486-1
pango-1.8.2-i486-1
sane-1.0.16-i486-1
x11-6.8.2-i486-4
-
xv-3.10a-i486-4

xv (John Bradley's interactive image viewer)

xv is an interactive image manipulation program.

NOTICE: This program is unregistered shareware. Please read the license information included.

aaa_elflibs-10.2.0-i486-3
x11-6.8.2-i486-4
-
xvidcore-1.0.3-i486-2kjz

XviD - MPEG-4 video codec

XviD is an ISO MPEG-4 compliant video codec. It is an open source project that is developed and maintained by people from all over the world. XviD claims to be the best currently available MPEG-4 video codec solution, and it is free software.

Packaged by Ken Zalewski (kennyz@nycap.rr.com)

- -
ydec-1.0.1b-i386-1dow

yEnc.org - the yEncoder/yDecoder for Usenet

An efficient and CRC protected binary encoding for Usenet messages

Official website : http://www.yenc.org

- -
zlib-1.2.3-i486-1

zlib (compression library)

zlib is a general purpose thread safe data compression library. The data format used by the zlib library is described by RFCs 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt (zlib format) rfc1951.txt (deflate format) and rfc1952.txt (gzip format).

- -
zsnes-1.36-i486-1cy

zsnes 1.36

ZSNES is a Super Nintendo emulator.

Package Created By: Cast-Away

aaa_elflibs-10.2.0-i486-3
cxxlibs-5.0.7-i486-1
NVidia-1.0.7676-ix86-1dow
sdl-1.2.9-i486-1
x11-6.8.2-i486-4
-